ryan-ma/PD_Micro

Issues

• if vbus not connect，how to find and handle attach

  #19 opened 2 months ago by sgf201
  0

• Where to buy?

  #16 opened 2 years ago by igoralves1
  3

• Multiple voltage output?

  #18 opened 7 months ago by digimbyte
  0

• Does not work with power bank

  #17 opened a year ago by Ueberspannung
  0

• Get list of possible voltages/current limits

  #2 opened 3 years ago by kaythe
  12

• Support for PD 3.1 48V

  #12 opened 2 years ago by 3dberg
  1

• Bootloader

  #8 opened a year ago by gcormier
  1

• BOM

  #15 opened 2 years ago by dsirov
  0

• Wifi enabled with API?

  #14 opened 2 years ago by Felixrising
  0

• Anywhere to buy these currently?

  #13 opened 2 years ago by ryancdotorg
  2

• Drop in replacement for TPS62175DQCR? It's sold out everywhere, restock eta July 2023.

  #11 opened 2 years ago by Inventor22
  0

• PPS defaults to 5V after working correctly for 60 seconds

  #10 opened 3 years ago by awc105
  1

• Voltage present after load switch is set to off

  #6 opened 3 years ago by Benjin454
  3

• Doesn't recongnize when charging cable is unplugged

  #9 opened 3 years ago by phippstech
  1

• Add a diode between VBus and the USB-C connector?

  #5 opened 3 years ago by EternityForest
  3

• How to change the Changing PPS voltage and current in run time? Need an example for it,plz! THX :)

  #7 opened 3 years ago by pengjjchao
  3

• PPS above 11V exits after 5 seconds of triggering

  #4 opened 3 years ago by sakura-ushio
  2

• Current limit not being enforced in PPS mode

  #1 opened 3 years ago by nsluhrs
  1

• avrdude: butterfly_recv(): programmer is not responding

  #3 opened 3 years ago by jenesaisdiq
  2