patat

patat (Presentations Atop The ANSI Terminal) is a small tool that allows you to show presentations using only an ANSI terminal. It does not require ncurses.

Features:

Leverages the great Pandoc library to support many input formats including Literate Haskell.
Supports smart slide splitting.
Slides can be split up into multiple fragments
There is a live reload mode.
Theming support including 24-bit RGB.
Auto advancing with configurable delay.
Optionally re-wrapping text to terminal width with proper indentation.
Syntax highlighting for nearly one hundred languages generated from Kate syntax files.
Experimental images support.
Written in Haskell.

Table of Contents
Installation
- Pre-built-packages
- From source
Running
Options
Controls
Input format
Configuration
Trivia

Installation

Pre-built-packages

Archlinux: https://aur.archlinux.org/packages/patat-bin
Debian: https://packages.debian.org/unstable/patat
Ubuntu: https://packages.ubuntu.com/bionic/patat
openSUSE: https://build.opensuse.org/package/show/openSUSE:Factory:ARM/patat

You can also find generic linux binaries here: https://github.com/jaspervdj/patat/releases.

From source

Installation from source is very easy. You can build from source using stack install or cabal install. patat is also available from Hackage.

For people unfamiliar with the Haskell ecosystem, this means you can do either of the following:

Using stack

Install stack for your platform.
Clone this repository.
Run stack setup (if you're running stack for the first time) and stack install.
Make sure $HOME/.local/bin is in your $PATH.

Using cabal

Install cabal for your platform.
Run cabal install patat.
Make sure $HOME/.cabal/bin is in your $PATH.

Running

patat [*options*] file

Options

-w, --watch

: If you provide the --watch flag, patat will watch the presentation file for changes and reload automatically. This is very useful when you are writing the presentation.

-f, --force

: Run the presentation even if the terminal claims it does not support ANSI features.

-d, --dump

: Just dump all the slides to stdout. This is useful for debugging.

--version

: Display version information.

Controls

Next slide: space, enter, l, →, PageDown
Previous slide: backspace, h, ←, PageUp
Go forward 10 slides: j, ↓
Go backward 10 slides: k, ↑
First slide: 0
Last slide: G
Reload file: r
Quit: q

The r key is very useful since it allows you to preview your slides while you are writing them. You can also use this to fix artifacts when the terminal is resized.

Input format

The input format can be anything that Pandoc supports. Plain markdown is usually the most simple solution:

---
title: This is my presentation
author: Jane Doe
...

# This is a slide

Slide contents.  Yay.

---

# Important title

Things I like:

- Markdown
- Haskell
- Pandoc

Horizontal rulers (---) are used to split slides.

However, if you prefer not use these since they are a bit intrusive in the markdown, you can also start every slide with a header. In that case, the file should not contain a single horizontal ruler.

patat will pick the most deeply nested header (e.g. h2) as the marker for a new slide. Headers above the most deeply nested header (e.g. h1) will turn into title slides, which are displayed as as a slide containing only the centered title.

This means the following document is equivalent to the one we saw before:

---
title: This is my presentation
author: Jane Doe
...

# This is a slide

Slide contents.  Yay.

# Important title

Things I like:

- Markdown
- Haskell
- Pandoc

And that following document contains three slides: a title slide, followed by two content slides.

---
title: This is my presentation
author: Jane Doe
...

# Chapter 1

## This is a slide

Slide contents.  Yay.

## Another slide

Things I like:

- Markdown
- Haskell
- Pandoc

For more information, see Advanced slide splitting.

Patat supports comments which can be used as speaker notes.

---
title: This is my presentation
author: Jane Doe
...

# Chapter 1

<!--
Note: I should not bore the audience with my thoughts on powerpoint but
just get straight to the point.
-->

Slide contents.  Yay.

<!-- TODO: Finish the rest of the presentation. -->

Configuration

patat is fairly configurable. The configuration is done using YAML. There are two places where you can put your configuration:

In the presentation file itself, using the Pandoc metadata header.
In $HOME/.patat.yaml

For example, we set an option key to val by using the following file:

---
title: Presentation with options
author: John Doe
patat:
    key: val
...

Hello world.

Or we can use a normal presentation and have the following $HOME/.patat.yaml:

key: val

Line wrapping

Line wrapping can be enabled by setting wrap: true in the configuration. This will re-wrap all lines to fit the terminal width better.

Margins

Margins can be enabled by setting a margins entry in the configuration:

---
title: Presentation with margins
author: John Doe
patat:
    wrap: true
    margins:
        left: 10
        right: 10
...

Lorem ipsum dolor sit amet, ...

This example configuration will generate slides with a margin of 10 characters on the left, and break lines 10 characters before they reach the end of the terminal's width.

It is recommended to enable line wrapping along with this feature.

Auto advancing

By setting autoAdvanceDelay to a number of seconds, patat will automatically advance to the next slide.

---
title: Auto-advance, yes please
author: John Doe
patat:
    autoAdvanceDelay: 2
...

Hello World!

---

This slide will be shown two seconds after the presentation starts.

Note that changes to autoAdvanceDelay are not picked up automatically if you are running patat --watch. This requires restarting patat.

Advanced slide splitting

You can control the way slide splitting works by setting the slideLevel variable. This variable defaults to the least header that occurs before a non-header, but it can also be explicitly defined. For example, in the following document, the slideLevel defaults to 2:

# This is a slide

## This is a nested header

This is some content

With slideLevel 2, the h1 will turn into a "title slide", and the h2 will be displayed at the top of the second slide. We can customize this by setting slideLevel manually:

---
patat:
  slideLevel: 1
...

# This is a slide

## This is a nested header

This is some content

Now, we will only see one slide, which contains a nested header.

Fragmented slides

By default, slides are always displayed "all at once". If you want to display them fragment by fragment, there are two ways to do that. The most common case is that lists should be displayed incrementally.

This can be configured by settings incrementalLists to true in the metadata block:

---
title: Presentation with incremental lists
author: John Doe
patat:
    incrementalLists: true
...

- This list
- is displayed
- item by item

Setting incrementalLists works on all lists in the presentation. To flip the setting for a specific list, wrap it in a block quote. This will make the list incremental if incrementalLists is not set, and it will display the list all at once if incrementalLists is set to true.

This example contains a sublist which is also displayed incrementally, and then a sublist which is displayed all at once (by merit of the block quote).

---
title: Presentation with incremental lists
author: John Doe
patat:
    incrementalLists: true
...

- This list
- is displayed

    * item
    * by item

- Or sometimes

    > * all at
    > * once

Another way to break up slides is to use a pagraph only containing three dots separated by spaces. For example, this slide has two pauses:

Legen

. . .

wait for it

. . .

Dary!

Theming

Colors and other properties can also be changed using this configuration. For example, we can have:

---
author: 'Jasper Van der Jeugt'
title: 'This is a test'
patat:
    wrap: true
    theme:
        emph: [vividBlue, onVividBlack, italic]
        strong: [bold]
        imageTarget: [onDullWhite, vividRed]
...

# This is a presentation

This is _emph_ text.

![Hello](foo.png)

The properties that can be given a list of styles are:

blockQuote, borders, bulletList, codeBlock, code, definitionList, definitionTerm, emph, header, imageTarget, imageText, linkTarget, linkText, math, orderedList, quoted, strikeout, strong, tableHeader, tableSeparator

The accepted styles are:

bold, italic, dullBlack, dullBlue, dullCyan, dullGreen, dullMagenta, dullRed, dullWhite, dullYellow, onDullBlack, onDullBlue, onDullCyan, onDullGreen, onDullMagenta, onDullRed, onDullWhite, onDullYellow, onVividBlack, onVividBlue, onVividCyan, onVividGreen, onVividMagenta, onVividRed, onVividWhite, onVividYellow, underline, vividBlack, vividBlue, vividCyan, vividGreen, vividMagenta, vividRed, vividWhite, vividYellow

Also accepted are styles of the form rgb#RrGgBb and onRgb#RrGgBb, where Rr Gg and Bb are hexadecimal bytes (e.g. rgb#f08000 for an orange foreground, and onRgb#101060 for a deep purple background). Naturally, your terminal needs to support 24-bit RGB for this to work. When creating portable presentations, it might be better to stick with the named colours listed above.

Syntax Highlighting

As part of theming, syntax highlighting is also configurable. This can be configured like this:

---
patat:
  theme:
    syntaxHighlighting:
      decVal: [bold, onDullRed]
...

...

decVal refers to "decimal values". This is known as a "token type". For a full list of token types, see this list -- the names are derived from there in an obvious way.

Pandoc Extensions

Pandoc comes with a fair number of extensions on top of markdown, listed here.

patat enables a number of them by default, but this is also customizable.

In order to enable an additional extensions, e.g. autolink_bare_uris, add it to the pandocExtensions field in the YAML metadata:

---
patat:
  pandocExtensions:
    - patat_extensions
    - autolink_bare_uris
...

Document content...

The patat_extensions in the above snippet refers to the default set of extensions enabled by patat. If you want to disable those and only use a select few extensions, simply leave it out and choose your own:

---
patat:
  pandocExtensions:
    - autolink_bare_uris
    - emoji
...

...

Document content...

If you don't want to enable any extensions, simply set pandocExtensions to the empty list [].

Images

patat-0.8.0.0 and newer include images support for some terminal emulators.

---
patat:
  images:
    backend: auto
...

# A slide with only an image.

![](matterhorn.jpg)

If images is enabled (not by default), patat will draw slides that consist only of a single image just by drawing the image, centered and resized to fit the terminal window.

patat supports the following image drawing backends:

backend: iterm2: uses iTerm2's special escape sequence to render the image. This even works with animated GIFs!
backend: w3m: uses the w3mimgdisplay executable to draw directly onto the window. This has been tested in urxvt and xterm, but is known to produce weird results in tmux.

If w3mimgdisplay is in a non-standard location, you can specify that using path:
```
backend: 'w3m'
path: '/home/jasper/.local/bin/w3mimgdisplay'
```

Trivia

"Patat" is the Flemish word for a simple potato. Dutch people also use it to refer to French Fries but I don't really do that -- in Belgium we just call fries "Frieten".

The idea of patat is largely based upon MDP which is in turn based upon VTMC. I wanted to write a clone using Pandoc because I ran into a markdown parsing bug in MDP which I could not work around. A second reason to do a Pandoc-based tool was that I would be able to use Literate Haskell as well. Lastly, I also prefer not to install Node.js on my machine if I can avoid it.

ryantm/patat