Photobooth with a Raspberry Pi
Modified from http://www.instructables.com/id/Raspberry-Pi-photo-booth-controller/?ALLSTEPS
sudo wget raw.github.com/gonzalo/gphoto2-updater/master/gphoto2-updater.sh
Basically: Install gphoto sudo chmod 755 gphoto2-updater.sh sudo ./gphoto2-updater.sh
To ensure your camera mounts properly to be controlled via USB remove these files:
sudo rm /usr/share/dbus-1/services/org.gtk.Private.GPhoto2VolumeMonitor.service sudo rm /usr/share/gvfs/mounts/gphoto2.mount sudo rm /usr/share/gvfs/remote-volume-monitors/gphoto2.monitor sudo rm /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
Restart: sudo shutdown -r 0
Install CUPS for printing: sudo apt-get install cups sudo usermod -a -G lpadmin pi
http://127.0.0.1:631 This will open up the CUPS setup. Click "administration" and "add printer;" enter your username and password (e.g., the defaults "pi" and "raspberry").
You should see your printer listed under "local printer;" select it and click "continue." Set the name and location of your printer as you like, and click "continue." Select the driver for your printer. For me, there was no CP900 driver, but the CP770 driver worked just fine. Set the default options.
**Add a Class if you want to use a pool of printers... then print to the pool!
Check for active printers lpstat -p
Install ImageMagik sudo apt-get install imagemagick
mkdir -p ~/scripts/photobooth cd ~/scripts/photobooth
Get these scripts, make them executable. sudo chmod 755 *
Edit the "assemble_and_print" script. Change the "lp" line to include your printer name (or Class). sudo nano assemble_and_print
Make directories for assembling the montage and archiving shots. mkdir ~/photobooth_images mkdir ~/PB_archive
Copy a label for photos to /:
scp photobooth_label.jpg pi@rpicam.local:
Set script to run automatically.
sudo nano /etc/rc.local insert: /home/pi/scripts/photobooth/startup_script & above the "exit 0" line
Restart the RPi sudo shutdown -r 0