Run eibd from BCUSDK on the Raspberry Pi. You can find a ready to run image on s10l/eibd-rpi.
If you want to build BCUSDK by your own, you can use my ready to run image to build the ARM binaries of BCUSDK for your Raspberry on your x64 machine running docker. For more information visit s10l/docker-eibd-rpi-build on GitHub or use the image s10l/eibd-rpi-build on Docker Hub
Due to Docker Hub's build architecture is based on AMD64, the Dockerfile injects /etc/passwd, /etc/shadow, /etc/group instead of using the useradd command. If you want you can build you own credentials, see mk-credentials.sh for details.
chown 1000:1000 /dev/ttyAMA0
docker run \
-rm \
-d \
--device=/dev/ttyAMA0 \
--net=host \
-p 6720:6720 \
-p 3671:3671/udp \
--restart unless-stopped \
s10l/eibd-rpi
| Parameter | Value | Description |
|---|---|---|
| -rm | --- | Automatically remove the container when it exits |
| --device | /dev/ttyAMA0 | Add the UART device from host to the container |
| --net | host | Connect a container to the host network |
| -p | 6720:6720 | Publish the container's port(s) for eibd connection to the host |
| -p | 3671:3671/udp | Publish the container's port(s) for ets connection to the host |
| --restart | unless-stopped | Restart policy to apply when a container exits |
| --- | s10l/eibd-rpi | Name of the image |
The combination of -p 6720:6720 -p 3671:3671/udp and --net=host is suboptimal, because -p is bypassed if --net=host is used.
My prefered way is without --net=host, but i don't know how to supply multicast network ability in a docker container. If you have some good advices feel free to share.