NoteBook FanControl

This is a C port of Stefan Hirschmann's NoteBook FanControl.

It provides the same utilities with the same interfaces as the original NBFC, although the implementation differs.

Comparison of NBFC C# and NBFC Linux

What	NBFC Mono	NBFC Linux
Portability	Crossplatform	Linux
Configuration files	XML (956KB)	JSON (840KB)
Runtime	Mono	Native
Memory consumption (ps_mem)	~50MB	~350KB
Package size (pkg.tar.gz)	448K	100K
Service control rights	Any user	Only root
IPC Concept	TCP/IP	Files
IPC Protocol	Binary	JSON

The service and the probing tool are written in C. The client is written in Python. Another client has also been written in C.

Installation

Arch Linux:
- Either via AUR (yaourt -S nbfc-linux)
- Or by using the PKGBUILD nbfc-linux-git
With Nix:
- With legacy nix (nix-env -if .)
- With nix flakes (nix profile install)
In general:
- make && sudo make install

Getting started

When running NBFC for the first time, you need to give it a configuration file for your laptop model.

If you are lucky, sudo nbfc config --set auto will find a matching one and set it.

sudo nbfc config --recommend (requires dmidecode) will give a list of configuration files that may match your laptop.

With sudo nbfc config --set <MODEL> a configuration is selected.

sudo nbfc start will start the service.

It can be queried by sudo nbfc status -a.

If you wish nbfc_service to get started on boot, use sudo systemctl enable nbfc_service.

Differences en detail

Files	NBFC Mono	NBFC Linux
Systemd service file	nbfc.service	nbfc_service.service
EC Probing tool	ec-probe	ec_probe
Notebook configuration files	/opt/nbfc/Configs/*.xml	/usr/share/nbfc/configs/*.json
Service binary	/opt/nbfc/nbfcservice.sh	/bin/nbfc_service
PID File	/run/nbfc.pid	/run/nbfc_service.pid
State file	-	/run/nbfc_service.state.json
Config file	?	/etc/nbfc/nbfc.json

The original NBFC service is queried and controlled by the client using TCP/IP. - NBFC Linux does not implement any "real" IPC. Information about the service can be queried by reading its state file. The client controls the service by simply rewriting its configuration file and reloading it.
The original NBFC service adjusts the fan speeds in intervals of EcPollIntervall according to TemperatureThresholds. - NBFC Linux directly sets the fan speed (also according to TemperatureThresholds).
The original NBFC service selects a TemperatureThreshold and applies its FanSpeed when the temperature exceeds its UpThreshold. In contrast, NBFC Linux will select the next TemperatureThreshold and apply its FanSpeed when the temperature exceeds the current UpThreshold. The provided config files have been reconfigured to account for this change, so that they provide the same behaviour as the original NBFC service. If you have a custom config file that works well with the original service, you can port it to NBFC Linux using the provided tool (requires python3-lxml).
NBFC Linux dropped the Autostart option, since it relies on the systemd service file only.

Troubleshooting

The preferred way of running nbfc is using the ECSysLinux implementation, which depends on the ec_sys kernel module. There is also an alternative implementation which uses /dev/port, called ec_linux. It can be specified on the commandline using --embedded-controller=ec_linux and permanently set in /etc/nbfc/nbfc.json with "EmbeddedControllerType": "ec_linux".

For running NBFC with Secure Boot and Lockdown Kernel, see acpi_ec

Shell autocompletion

NBFC-Linux comes with shell completion scripts for bash, fish and zsh.

~ $ nbfc_service <TAB>
--config-file          -c  -- Use alternative config file (default /etc/nbfc/nbfc.json)
--debug                -d  -- Enable tracing of reads and writes of the embedded controller
--embedded-controller  -e  -- Specify embedded controller to use
--fork                 -f  -- Switch process to background after sucessfully started
--help                 -h  -- show this help message and exit
--readonly             -r  -- Start in read-only mode
--state-file           -s  -- Write state to an alternative file (default /var/run/nbfc_service.state.json)

~ $ nbfc <TAB>
config   -- List or apply configs
help     -- Show help
restart  -- Restart the service
set      -- Control fan speed
start    -- Start the service
status   -- Show the service status
stop     -- Stop the service

See also the documentation about the nbfc configuration.