What is Blynk?

Blynk is a platform with iOS and Android apps to control Arduino, Raspberry Pi and the likes over the Internet.
You can easily build graphic interfaces for all your projects by simply dragging and dropping widgets. If you need more information, please follow these links:

Blynk server

Blynk Server is an Open-Source Netty based Java server, responsible for forwarding messages between Blynk mobile application and various microcontroller boards (i.e. Arduino, Raspberry Pi. etc). Take latest build here.

Requirements

Java 8 required. (OpenJDK, Oracle). Installation instructions here.

GETTING STARTED

By default, mobile application uses 8443 port and is based on SSL/TLS sockets. Default hardware port is 8442 and is based on plain TCP/IP sockets.

Quick local server setup

Make sure you are using Java 8

  java -version
  Output: java version "1.8.0_40"

Run the server on default 'hardware port 8442' and default 'application port 8443' (SSL port)
```
  java -jar server-{PUT_LATEST_VERSION_HERE}.jar -dataFolder /path
```

That's it! You will see no output cause all logging is done within same folder in ./logs/blynk.log file.

App and sketch changes

Specify custom server path in your application

Change your ethernet sketch from

  Blynk.begin(auth);
  to
  Blynk.begin(auth, "your_host");
  or to 
  Blynk.begin(auth, IPAddress(xxx,xxx,xxx,xxx));

Change your WIFI sketch from

  Blynk.begin(auth, SSID, pass));
  to
  Blynk.begin(auth, SSID, pass, "your_host");
  or to
  Blynk.begin(auth, SSID, pass, IPAddress(XXX,XXX,XXX,XXX));

or in case of USB when running blynk-ser.sh provide '-s' option with address of your local server
```
  ./blynk-ser.sh -s you_host_or_IP
```

Advanced local server setup

If you need more flexibility, you can extend server with more options by creating server.properties file in same folder as server.jar. Example could be found here. server.properties options:

Application port
```
  app.ssl.port=8443
```
For simplicity Blynk already provides server jar with build-in SSL certificates, so you have working server out of the box via SSL/TLS sockets. But as certificate and it's private key are in public this is totally not secure. So in order to fix that you need to provide your own certificates. And change below properties with path to your cert. and private key and it's password. See how to generate self-signed certificates here
```
  #points to cert and key that placed in same folder as running jar.
  
  server.ssl.cert=./server_embedded.crt
  server.ssl.key=./server_embedded.pem
  server.ssl.key.pass=pupkin123
```
Hardware port
```
  hardware.default.port=8442
```
User profiles folder. Folder in which all users profiles will be stored. By default System.getProperty("java.io.tmpdir")/blynk used. Will be created if not exists
```
  data.folder=/tmp/blynk
```
Folder for all application logs. Will be created if it doesn't exist
```
  logs.folder=./logs
```
Log debug level. Possible values: trace|debug|info|error. Defines how precise logging will be. From left to right -> maximum logging to minimum
```
  log.level=trace
```
Maximum allowed number of user dashboards. This value can be changed without restarting the server. ("Reloadable" below)
```
  user.dashboard.max.limit=10
```
100 Req/sec rate limit per user. Reloadable
```
  user.message.quota.limit=100
```
In case user exceeds quota limit - response error returned only once in specified period (in Millis). Reloadable
```
  user.message.quota.limit.exceeded.warning.period=60000
```
Maximum allowed user profile size. In Kb's. Reloadable
```
  user.profile.max.size=128
```
In-memory storage limit for storing read values from hardware
```
  user.in.memory.storage.limit=1000
```
Maximum allowed number of notification queue. Queue responsible for processing email, pushes, twits sending. Because of performance issue - those queue is processed in separate thread, this is required due to blocking nature of all above operations. Usually limit shouldn't be reached
```
  notifications.queue.limit=10000
```
Period for flushing all user DB to disk. In millis
```
  profile.save.worker.period=60000
```
Specifies maximum period of time when application socket could be idle. After which socket will be closed due to non activity. In seconds. Leave it empty for infinity timeout
```
  app.socket.idle.timeout=600
```
Specifies maximum period of time when hardware socket could be idle. After which socket will be closed due to non activity. In seconds. Leave it empty for infinity timeout
```
  hard.socket.idle.timeout=15
```
Mostly required for local servers setup in case user want to log raw data in CSV format. See [raw data] (https://github.com/blynkkk/blynk-server#raw-data-storage) section for more info.
```
  enable.raw.data.store=true
```
Comma separated list of users allowed to create accounts. Leave it empty if no restriction required.
```
  allowed.users.list=allowed1@gmail.com,allowed2@gmail.com
```

Enabling mail on Local server

In order to enable mail notifications on Local server you need to provide own mail credentials. To do that you need to create file "mail.properties" within same folder where server.jar is. Mail properties :

    mail.smtp.auth=true
    mail.smtp.starttls.enable=true
    mail.smtp.host=smtp.gmail.com
    mail.smtp.port=587
    mail.smtp.username=YOUR_EMAIL_HERE
    mail.smtp.password=YOUR_EMAIL_PASS_HERE

See example here.

NOTE : you'll need to setup Gmail to allow less secured applications. Go here and then click "Allow less secure apps".

Raw data storage

By default raw data storage is enabled. So any write (Blynk.virtualWrite) command will stored on disk. The default path is "data" folder within [data.folder] (https://github.com/blynkkk/blynk-server#advanced-local-server-setup) property of server properties.

File name format is

    dashBoardId_pin.csv

For instance

    data/1_v5.csv

Which means in 1_v5.csv file stored raw data for virtual pin 5 of dashboard with id 1.

Data format is

    value,timestamp

For instance

    10,1438022081332

Where 10 - value of pin, and 1438022081332 - the difference, measured in milliseconds, between the current time and midnight, January 1, 1970 UTC.

Raw data files are rotated every day and gzipped.

WARNING : this will changed in near future.

Generate SSL certificates

Create key
```
  openssl genrsa -out server.key 2048
```

Create new cert request

  openssl req -new -out server.csr -key server.key

Generate self-signed request

  openssl x509 -req -days 1825 -in server.csr -signkey server.key -out server.crt

Convert server.key to PKCS#8 private key file in PEM format

  openssl pkcs8 -topk8 -inform PEM -outform PEM -in server.key -out server.pem

WARNING : in case you connect hardware via USB script you have to provide an option '-s' pointing to "common name" (hostname) you did specified during certificate generation.

As output you'll retrieve server.crt and server.pem files that you need to provide for server.ssl properties.

Install java for Ubuntu

    sudo apt-add-repository ppa:webupd8team/java
    sudo apt-get update
    sudo apt-get install oracle-java8-installer

Behind wifi router

If you want to run Blynk server behind WiFi-router and want it to be accessible from the Internet, you have to add port-forwarding rule on your router. This is required in order to forward all of the requests that come to the router within the local network to Blynk server.

Performance

Currently server handles 20k req/sec with SSL and 40k req/sec without SSL hardware messages on VM with 2-cores of Intel(R) Xeon(R) CPU E5-2660 @ 2.20GHz. With high load - memory consumption could be up to 1 GB of RAM.

App Client (emulates Smartphone App)

To emulate the Smartphone App client:

  java -jar client-${PUT_LATEST_VERSION_HERE}.jar -mode app -host localhost -port 8443

In this client: register new user and/or login with the same credentials

  register username@example.com UserPassword
  login username@example.com UserPassword

Save profile with simple dashboard

  saveProfile {"dashBoards":[{"id":1, "name":"My Dashboard", "boardType":"UNO"}]}

Get the Auth Token for hardware (e.g Arduino)
```
  getToken 1
```
Activate dashboard
```
  activate 1
```

You will get server response similar to this:

  00:05:18.100 TRACE  - Incomming : GetTokenMessage{id=30825, command=GET_TOKEN, length=32, body='33bcbe756b994a6768494d55d1543c74'}

Where 33bcbe756b994a6768494d55d1543c74 is your Auth Token.

Hardware Client (emulates Hardware)

Start new client and use received Auth Token to login

  java -jar client-${PUT_LATEST_VERSION_HERE}.jar -mode hardware -host localhost -port 8442
  login 33bcbe756b994a6768494d55d1543c74

You can run as many clients as you want.

Clients with the same credentials and Auth Token are grouped into one Session and can send messages to each other. All client’s commands are human-friendly, so you don't have to remember the codes.

Hardware Commands

Before sending any read/write commands to hardware, application must first send “init” command. "Init" command is a 'hardware' command which sets all the Pin Modes(pm). Here is an example of "init" command:

	hardware pm 1 in 13 out 9 out 8 in

// TODO: take description about pin modes from Blynk Arduino library readme // TODO Describe separation with Zeroes in pinmode command

In this example you set pin 1 and pin 8 to 'input’ PIN_MODE. This means this pins will read values from hardware (graph, display, etc). Pins 13 and 9 have 'output’ PIN_MODE. This means that these pins will we writable (button, slider).

List of hardware commands:

Digital write:
```
  hardware dw 9 1
  hardware dw 9 0
```

Digital read:

  hardware dr 9
  You should receive response: dw 9 <val>

Analog write:
```
  hardware aw 14 123
```

Analog read:

  hardware ar 14
  You should receive response: aw 14 <val>

Virtual write:

  hardware vw 9 1234
  hardware vw 9 string
  hardware vw 9 item1 item2 item3
  hardware vw 9 key1 val1 key2 val2

Virtual read:

  hardware vr 9
  You should receive response: vw 9 <values>

Licensing

MIT license

samuraicode/blynk-server