sandeepmistry/arduino-BLEPeripheral
An Arduino library for creating custom BLE peripherals with Nordic Semiconductor's nRF8001 or nR51822.
CMIT
Issues
- 4
- 0
UART Rx hangs after a few seconds when BLEPeripheral.begin(); is called on nRF51802
#299 opened by doh38 - 5
ble advertising data
#272 opened by tcpipchip - 3
blePeripheral.begin() stuck on nRF52832
#268 opened by kungfupizza - 0
nRF52832 Supported?
#297 opened by LiveRock - 0
Setting chip to idle state in between measurements
#296 opened by celiafb - 2
- 7
Freeze on blePeripheral.begin();
#291 opened by jLynx - 0
Update iBeacon broadcast packet after starting
#295 opened by fkahhaleh - 2
- 0
softdevice_sys_evt_handler_set()
#293 opened by TheLukaDragar - 0
- 1
How to set service name ?
#280 opened by Entretoize - 2
blePeripheral.begin() not executing.
#269 opened by JMAC4790 - 0
Abandoned project?
#289 opened by PRosenb - 0
[Question] Sending long string BLECharacteristic
#288 opened by jLynx - 2
- 1
Can't get response from Serial.println()
#264 opened by NickShargan - 0
- 11
How to send more than 20 bytes fast to Android app?
#245 opened by dots123 - 0
- 0
Numpad key codes, anyone?
#284 opened by asianplanet - 0
Speed / baudrate of the BLE connection?
#283 opened by pvonmoradi - 0
ANCS Implementation canWrite is false
#282 opened by M3sca - 6
Bondstore
#250 opened by suvodip1212 - 0
NRF5: CCCDs aren't persisted for bonded peers
#279 opened by jfedor2 - 1
- 0
Can't detect remote devices
#277 opened by damianb50 - 3
- 0
Capacitive Touch Sense
#271 opened by TamojitSaha - 0
BLESerial does not execute BLEPeripheral.poll()
#276 opened by pixmix - 2
bytes after a 0x00 are not sent
#265 opened by zeroby0 - 0
Enable advertisements AFTER connection
#275 opened by marquesn - 1
Temperature which is send using BLEFloatCharacteristic is not readable by mobile apps
#274 opened by mrdc - 0
Setting GAP address
#273 opened by jaybz - 1
NRF52832 sketches upload, successful GPIO control, but no BLE functionality
#270 opened by viscount-monty - 0
Does this library support Nordic secure bootloader?
#267 opened by rabih9780 - 0
BLEFixedLengthCharacteristic sends wrong data
#266 opened by zeroby0 - 1
How to send more than 2 packets per cycle?
#261 opened by neroroxxx - 3
Add support for nRF52840
#259 opened by tamberg - 2
Issue with nRF52-DK
#254 opened by jkpachunk - 0
The BLEPeripheral Library is not working properly with the Arduino SD library.
#260 opened by jkpachunk - 2
Upgrading to Latest SoftDevice and SDK
#258 opened by kevin-webster - 0
- 0
Arduino IDE Warnings
#256 opened by delahere - 1
Error in nRF5\0.2.3\platform.txt
#252 opened by MagnusThome - 0
- 2
.setTxPower() doesnot work for NRF51822
#249 opened by TamojitSaha - 0
Device no longer advertises when setting single byte using setManufacturerData
#247 opened by CharlesMod - 0
Advertising Battery levels on iBeacon
#246 opened by Autobot86