BluespecPCIe is a PCIe library for the Bluespec language. It includes a Bluespec wrapper for the Xilinx PCIe core, device driver for Linux, as well as a userspace library for easily communicating with the FPGA device. It supports DMA as well as memory-mapped I/O over PCIe. It also supports reprogramming the FPGA and using the PCIe without rebooting in between.
The biggest strength of BluespecPCIe over other PCIe implementations is its simplicity. A DMA memcpy demo builds in 5 minutes using vivado, and everything is designed to be plugged into a bluespec design as a module. BluespecPCIe does not need a special build tool, script or a meta language.
BluespecPCIe currently supports the KC705 and VC707 boards.
BluespecPCIe is still under active development. If you discover bugs, or has feature requests, please let me know!
BluespecPCIe depends on the bluelib library, which can be found here https://github.com/sangwoojun/bluelib.
By default, bluelib must be cloned at the same level as BluespecPCIe (e.g., ~/bluespecpcie and ~/bluelib). However, you can always change the individual Makefiles to point to different locations.
- Driver: In distribution/driver, run make, and sudo make install.
- Rescan tool: bsrescan lets the BIOS recognize the PCIe device without system reboot between re-programming the FPGA. In distribution/bsrescan, run make, and sudo make install. This installs bsrescan to /opt/bluespecpcie_manager/. You may want to add /opt/bluespecpcie_manager/ to your PATH.
- Example designs are in examples/. For the basic demo, go to examples/simple.
- Generate the Xilinx core by running make core BOARD=vc707 or make core BOARD=kc705, depending on the target board. This only needs to be done once.
- Build the demo by running make BOARD=vc707 or make BOARD=kc705.
- Program the FPGA by running vivado -mode batch -source ../../distribute/program.tcl
- If this is the first time programming this FPGA device after board power-on, the system must be rebooted.
- If this device has been programmed and rebooted before, run /opt/bluespecpcie_manager/bsrescan. This will re-discover the device and reload the driver.
- The device is programmed and ready to communicate with.
- Go to ./cpp and run make.
- Run ./obj/main to run the software demo.
- example/simple: Memory-mapped I/O example
- example/dmatest: DMA example
- example/dramtest: Uses the 1 GB on-board DRAM on both VC707 and KC705
- example/float: Floating point example
When creating a new project, it's simple to start by creating a copy of an example project. If creating a project outside the example directory, some variables need to be modified for the project to build correctly.
- in hardware Makefile, change LIBPATH
- in software Makefile, change LIBPATH
- in vivado-impl.tcl, change pciedir
Top.bsv contains the top level module. The interface interface PcieImportPins pcie_pins and the top level input clocks and resets including pcie_clk_p neet to be maintaind.
Software related files are located in the cpp directory.
You are free to copy and modify Makefile.base in the buildtools directory, as well as the vivado-impl*.tcl files.
However, it may be simpler to add cores and other functionality using the user-ip.tcl file, which is included by the implementation tcl script before synthesis starts. For example on how to use this, please look at the examples dramtest and float.
BluespecPCIe emulates the PCIe using a shared memory FIFO.
When building the hardware, run make bsim. When building the software, also run make bsim.
A symlink to the bsim software binary (or the actual binary) should be created at the top level (where the Makefile is), with the name ./sw.
To execute the hardware bsim simulation and software, run ./run.sh.
Note: The shared memory files may not be correctly deleted after a run. You may have to delete them using rm /dev/shm/bdbm*
- Development was done on Vivado 2018.2