Application for resetting USB devices on macOS. Borrowed from USB Prober app.
renumerate [OPTIONS] [vendor_id,product_id [vendor_id,product_id] [locationID [location ID]]...
The available options are as follows. If no option is specified the values after the options are assumed to be a
sequence of vendorID,productID pairs (in hex). If the -l option is specified, the values after the options are assumed
to be locationID's (in hex). If no action option is specitied, a reenumerate command will be sent to the device(s):
--locationID, -l
The values after the options are locationIDs, instead of vendorID,productID.
--configuration, -c
Set the USB configuration to the value specified.
--resume, -r
Send a USB Resume to the device.
--suspend, -s
Send a USB Suspend to the device.
--reset, -R
Send a USB ResetDevice to the device.
--verbose, -v
Verbose mode.
--version, -V
Print version.
--help, -h, -?
Show this help.
Reset device at vid: 0x0488, pid: 0x5740
renumerate 0x0488,0x5740
Set the configuration of the device at vid: 0x05ac, pid: 0x1126 to 1:
$ reenumerate -v -c 1 0x05ac,0x1126
Reenumerate the devices at locationIDs 0xfa144300 and 0xfd141310
$ reenumerate -v -l 0xfa144300 0xfd141310
Either use CMake or
cc reenumerate.c -framework IOKit -framework CoreFoundation -o reenumerate
make install from CMake build directory