Singularity-Easybuild

Description:

Collection of Singularity definition files and scripts to create them for popular Linux Distributions like Debian (Buster, Bullseye and Bookworm), Centos (7), and Rocky (8.5 and latest).

The definitions folder contains the successful Singularity Definition files, tested with version 3.5.3, 3.7.1, and CE-3.8.4 from Singularity, next to Apptainer/Singularity 3.8.5 , whereas the scripts folder contains the scripts to create the Singularity definition files which are based on EasyBuild. This version is using EasyBuild version 4.5.3.

Requirements:

You will need to have a Linux environment and Singularity installed in it. If you don't have Linux, please use Vagrant to set up a virtual Linux environment.

Please note: we noticed that Singularity version 3.8.x seems to have problems with the container internal envmod but it is working fine for the internal lmod. We are working on the issue so if you want to use envmod inside the container, for now we recommend to use Singularity version 3.7.x.

The minimum requirement for bash is version 4.x. If you are on MacOS, please use homebrew to install bash from there.

Furthermore, if you want to build the containers, you either need to have fakeroot installed and configured so it can be used as normal user, or have sudo installed. The latter is required if you want to open up containers and re-build them again.

As the software inside the containers is built using Easybuild, you will need to know the names of the Easybuild Configuration files, e.g. GCC-9.3.0.eb. Thus, it is probably best to install the easybuild-easyconfig files like this in a separate folder:

$ git clone https://github.com/easybuilders/easybuild-easyconfigs.git

and search the easybuild/easyconfigs folder for the name of the EasyBuild Configuration files you want to use. You only need the name, not the content of the file.

The version of EasyBuild is now fixed with this release. If you require a specific version, simply change inside the Singularity definition file this line:

pip3 install easybuild==4.5.2

to this line:

pip3 install easybuild

which will install the latest EasyBuild version.

Depreciated versions:

As Python2 is depreciated, the containers are using the Python3 version for as their default system version. Note: This is different from the Python versions EasyBuild will install and should not be mixed up.

As CentOS-8 is now end of life we are currently no longer supporting this version. We suggest to switch to Rocky-8 instead.

Usage:

Using the scripts is simple. Go into the scripts folder and run the installation script install.sh This will either install the scripts in your ~/bin folder as sym-links, or create the sym-links in the folder where you are running the script from. We advice you to install the script in the ~/bin folder so they are in your PATH environment. If you don't want to do this, we recommend to install the sym-links in a different folder from where you have downloaded the GitHub files from. Please note the usage of sym-links. Thus, if you do any changes in the folder where you downloaded the GitHub repository to, these changes will be carried over. If, for example, you were to delete that folder, the installation is broken.

During the installation, you will given a number of choices regarding whether you want to build or create the definition files, which Linux distribution and version you want to use and if you want to use Lmod or the environment-module system.

You can then execute for example, assuming the links are in your PATH environment:

$ container-create-debian11-envmodules.sh GCC-9.3.0.eb

You can supply a second script as well, which could be one you have created. This script will be read into the Singularity Build file. So in our example we would get a file called Singularity.GCC-9.3.0-envmod-debian11.

If you want to build the container and additionally a sandbox, you could use this instead:

$ container-build-debian11-envmodules.sh GCC-9.3.0.eb

So in our example we would get a file called Singularity.GCC-9.3.0-envmod-debian11, next to the Singularity container called GCC-9.3.0-envmod-debian11.sif

If you don't want to or cannot use the automatic build process, you can build the container like this:

$ sudo singularity build GCC-9.3.0-envmod-debian10.sif Singularity.GCC-9.3.0-envmod-debian10

Equally, if you want to install software on top of the existing container manually, simply do:

$ sudo singularity build --sandbox GCC-9.3.0-envmod-debian10.sif Singularity.GCC-9.3.0-envmod-debian10

See the example below for a complete build of R-4.0.0 in two steps: We first build the toolchain container (foss-2020a) and inside the container we build R-4.0.0. This approach allows us to create our own complete environment for building complete pipelines as well.

If you want to have your name and email address included in the Singularity definition file, just create this file:

~/.singularity/sing-eb.conf

An empty file will mean these values are not included in the Singularity definition file. If you want to include your name and email address, simply add it. Likewise, you can pin the version of EasyBuild you want to use, like 4.4.0 in this example:

name="Your Name"
email="email@address"
eb_version="EasyBuild-version"

and replace "Your Name" and "email@address" and the "EasyBuild-version" you want to use accordingly.

Example build:

This would be the complete sequence to build a container with the FOSS-2020a tool chain from EasyBuild, unpack the container and build for example R-4.0.0 inside the container. Of course you could to that all in one go as well. We are using the CentOS7 OS in this example:

We first create the Singularity Definition File. As we don't need to add a separate EasyBuild configuration file we say 'n' here:

$ container-create-centos8-envmodules.sh foss-2020a.eb

Do we need a second Easybuild recipe (y/N)?: n

$ ls
Singularity.foss-2020a-centos-8-envmod

We now build the Singularity container. Note that the command 'singularity' needs to be in the PATH of root:

$ sudo singularity build foss-2020a-centos-8-envmod.sif Singularity.foss-2020a-centos-8-envmod

$ ls
Singularity.foss-2020a-envmod-centos7 foss-2020a-envmod-centos7.sif

Now that we got a container, we can unpack it so we can add software to it. First we unpack:

$ sudo singularity build --sandbox foss-2020a-centos-8-envmod foss-2020a-centos-8-envmod.sif
$ ls
Singularity.foss-2020a-centos-8-envmod foss-2020a-centos-8-envmod.sif foss-2020a-centos-8-envmod

Now we enter the container. The '-w' flag means we can write to the pseudo-chroot environment:

$ sudo singularity shell -w foss-2020a-centos-8-envmod

We become the easybuild user and install the software. We first fetch all the source files. This is sometimes a problem due to flaky Internet connections. We then, in a second step, build the software. This step can take some time but is done fully automatic. Once build, we exit the container again:

# su -l easybuild
[easybuild]$ eb --fetch R-4.0.0-foss-2020a.eb
[easybuild]$ eb  R-4.0.0-foss-2020a.eb
[easybuild]$ exit
# exit

One step we need to do here as root is, to change the environment file so the new module will be loaded. This will be towards the bottom of this file:

$ sudo vi foss-2020a-centos-8-envmod/environment

Finally, we build the Singularity container:

$ sudo singularity build  R-4.0.0-foss-2020a-centos-8-envmod .sif foss-2020a-centos-8-envmod 

$ ls
Singularity.foss-2020a-centos-8-envmod  foss-2020a-centos-8-envmod .sif foss-2020a-centos-8-envmod  R-4.0.0-foss-2020a-centos-8-envmod .sif

Now you can run R-4.0.0 on a different system like this:

$ singularity exec R-4.0.0-foss-2020a-centos-8-envmod.sif R
R>

We have introduced a more automated way of building containers. Thus, instead of doing all of the steps above manually, let the computer do it for you. Instead of using a 'create' script, we are simply using a 'build' script, like this for example:

$ container-build-centos8-envmodules.sh foss-2020a.eb

You will be asked whether or not to build the sandbox in the same run.

We would recommend to build a generic container like foss-2020b for example and then use the provided sandbox to add software to it.

For more details about what you can do with Singularity please refer to their home page.

Acknowledgement:

This work would not be possible without EasyBuild, I am greateful to the project and the community for their help.

Links:

Singularity: https://sylabs.io/guides/3.8/admin-guide/installation.html
(Source: https://github.com/sylabs/singularity/releases)

Apptainer: http://apptainer.org/ (Source: https://github.com/apptainer/singularity)

Vagrant: https://www.vagrantup.com/intro/getting-started
Easybuild: https://easybuild.readthedocs.io/en/latest

Updated: 11.3.2022

sassy-crick/Singularity-Easybuild