/Geom_Kisrhombille

Kisrhombille geometry classes and methods

Primary LanguageJavaGNU General Public License v3.0GPL-3.0

A Kisrhombille Tessellation Based Geometry and a New Kind of Fractal

by John Greene john@fleen.org


The Kisrhombille Tessellation

This is the kisrhombille tessellation.

It is a hexagon tessellation with each hexagon split into 12 triangles.

A hexagon Split into 12 triangles

This is the triangle.

Unit Triangle
F length=1
G length=√3
H length=2
P4 angle=π/2, connections=4
P6 angle=π/3, connections=6
P12 angle=π/6, connections=12

The intervals of F, G and H are referred to as fish, goat and hawk, respectively. fish is our unit interval. All the other intervals in this coordinate system derive from it. goat = fish X √3 hawk = fish X 2

KGrid : A Kisrhombille Tessellation Based Geometry Building System

KGrid is a geometry system (TODO game? formal system?...). Within it we build shapes and such. It has a method for addressing points and a rule governing how we build.

Addressing Points

In KGrid we address the points where the corners of the triangles touch. That is to say, where the lines intersect. I.e. the black dots.

We address a point using four integers (1). (ant,bat,cat,dog)

The first three integers (ant,bat,cat) address a hexagon.

hexagons with coors

The fourth integer (dog) addresses a point within a five-sided polygonal figure (the yellow things) based on that hexagon. kis grid with figures and dogs

Put them together and that's our coordinate system. It's discrete. kis grid with coors

Axes, Directions and the Geometry Building Rule

In KGrid we have 6 axes and 12 directions. kis grid axes star

When we define shapes within KGrid we align their sides with the axes. That's the building rule. Just as if we were building the shapes out of unit triangle shaped tiles (see The Kisrhombille Tessellation, above). kis grid axes aligned shapes

Object Classes

KPoint

class KPoint{
  ant
  bat
  cat
  dog
}

3 examples of KPoint example of 3 kpoints

A KPoint is a point in the KGrid. ant, bat, cat and dog are integers. Values for ant, bat and cat are in range [minint,maxint], though some combinations of values are invalid. Value for dog is in range [0,5].

KGrid

class KGrid{
  origin
  north
  fish
  twist
}
2 examples of KGrid
class kgrid example 1 class kgrid example 1

A KGrid is an instance of our coordinate system defined in terms of the plane. It shares its name with the geometry system that it implements. origin is a 2d point. It specifies the location of KPoint(0,0,0,0). north is a floating point value describing a direction. It's the direction from KPoint(0,0,0,0) to KPoint(0,0,0,2). fish is a floating point value. It is our unit interval. The shortest side of our unit triangle. twist is a value denoting chirality. Clockwise or counterclockwise. Probably boolean. It gives us the direction of east and west relative to north. It's also the direction that we go when traversing the perimenter of that hexagon-based figure that we use for dog (see above).

KSeg

KSeg{
  p0
  p1
}

class kseg

A KSeg is a line segment in a KGrid. p0 and p1 are KPoints. Two points define a line segment. All line segments in our system align with the axes of the system, viz the points of a KSeg are always coaxial. See above for details on axes.

KPolygon

KPolygon{
  points
}

class kpolygon

AKPolygon is a polygon in a KGrid. points is a list of 3..n KPoints. Each adjacent pair of points defines a KSeg. Thus, as is the case with KSegs, a KPolygon is aligned with the axes of our coordinate system. See above for details on axes.

Nesting Geometry

Recall that we define a KGrid using 4 params : origin, north, fish and twist (see above).

We can derive these params from a KPolygon. We can derive origin from V0, north from dir(V0,V1), fish from dis(V0,V1) and twist from the chirality of the polygon's point sequence. (2)

For example. Given grid0 Create a polygon (that hexagon there) in grid0. Then from that polygon derive the params for a new grid, grid1. kpolygon with kgrid params labelled

grid1.origin is the real point of p0.

grid1.north is the real direction from p0 to p1.

grid1.fish is derived from the distance from p0 to p1 (dp0p1). Get M, the distance from p0 to p1 in terms of grid0.fish. Then grid1.fish = dp0p1 / M.

grid1.twist is derived from the chirality of the vertex sequence. Clockwise chirality means twist=true.

Thus we define a new grid, grid1. kgrid within kpolygon (Note that our new grid is not actually constrained to the area of the polygon, I'm just illustrating it that way to make it clear.)

We can also use a 4th param, an integer, density. By dividing our new fish by density we can control the resolution of the new grid.(3) (4)

3 densities
density 1 density 2 density 3

And then, within that new grid, we can define another polygon, and so on.

nested stuff

Obviously this suggests that we could create some kind of infinite nesting structure, a variety of vector fractal. We could implement the play of geometry and geometry operators with some kind of shape grammar, manage symmetry and grouping somehow and get stuff like this

forsythia fractal sample 2

See the Forsythia Fractal for more on that.

FOOTNOTES

(1) Yes we could do it with 3 integers (2 for the hexagon and 1 for the figure) but right now we're doing it with 4. Going to 3 would mean rewriting a bunch of code.

(2) Details of fish derivation. We derive fish by getting the length of (v0,v1) in terms of fish (by adding up the segs) then divide the real distance from v0 to v1 by that to get fish.

(3) For density control we divide fish by the density param.

(4) We are exploiting a special property of the Kisrhombille Tessellation here. The property of the same shape being describable at an infinite range of tessellation resolutions. This property is shared by square and triangle tessellations but not by hexagon tessellations.