sballin/GPI_W7-X

Issues

• Screenshots

  #1 opened 6 years ago by sballin
  3

• bug: p asymptotically goes to negative value on pumping, valve closes early

  #9 opened 4 years ago by astechow
  2

• feature: block V4 (pump valve) on overpressure

  #8 opened 4 years ago by astechow
  0

• bug: on "fill" action when p is higher than requested p, fill valve is opened

  #3 opened 4 years ago by astechow
  0

• HINT: Use unix line ending and uniform whitespace and chmod

  #19 opened 4 years ago by zack-vii
  0

• feature: interrupt actions and return to idle state

  #6 opened 4 years ago by astechow
  1

• feature: block controls in shot cycle

  #5 opened 4 years ago by astechow
  1

• consistent SI units

  #14 opened 4 years ago by astechow
  0

• feature: GUI display of last puff "fast" data

  #10 opened 4 years ago by astechow
  3

• feature: logging of actions to file

  #12 opened 4 years ago by astechow
  0

• feature: partially release pressure

  #11 opened 4 years ago by astechow
  2

• better state handling and transitions

  #4 opened 4 years ago by astechow
  0

• Red Pitaya connection gets messed up after a couple hours

  #18 opened 4 years ago by sballin
  2

• gauge displays value close to 0 when disconnected, potentially dangerous for pump

  #13 opened 4 years ago by astechow
  2

• feature: handle W7-X permission signal

  #15 opened 4 years ago by astechow
  3

• wrong valve info power/press. air failure

  #17 opened 4 years ago by astechow
  1

• cosmetics: rename "GPI safe state" to "GPI puff armed"

  #16 opened 4 years ago by astechow
  0

• feature: auto-safe on communication failure

  #7 opened 4 years ago by astechow
  0

• on

  #2 opened 4 years ago by astechow
  0