Reduce the burden of 3D modeling in mathematics.
Based on OpenSCAD 2019.05. For old OpenSCAD versions, please use dotSCAD 1.3. You can download all versions from the releases.
OpenSCAD uses three library locations, the installation library, built-in library, and user defined libraries. It's convenient to set OPENSCADPATH
. Check Setting OPENSCADPATH in OpenSCAD User Manual/Libraries for details.
Every module or function is located in the file which has the same name as the module or the function. For example, if you want to use the line2d
module to draw a line, include <line2d.scad>;
first.
include <line2d.scad>;
line2d(p1 = [0, 0], p2 = [5, 0], width = 1);
Some module files are organized in a directory. For example, px_circle.scad exists in pixel
directory. You have to prefix the directory name when including px_circle
.
include <pixel/px_circle.scad>;
points = px_circle(radius = 10);
for(pt = points) {
translate(pt) square(1);
}
Some modules depend on other modules. For example, the polyline2d
module depends on the line2d
module, so you also have to include <line2d.scad>;
besides include <polyline3d.scad>;
.
include <line2d.scad>;
include <polyline3d.scad>;
polyline2d(points = [[1, 2], [-5, -4], [-5, 3], [5, 5]], width = 1);
If OpenSCAD generates "WARNING: Ignoring unknown xxx function" or "WARNING: Ignoring unknown xxx module" when using one module of dotSCAD. Just try to include <xxx.scad>;
or include <dir/xxx.scad>
if xxx.scad exists in dir
directory.
Too many dependencies? Because OpenSCAD doesn't provide namespace management, I personally think that exposing dependencies is better than hiding them. In this way, users can have their own way to manage dependencies. How to categorize dependencies is up to you. For example, you can include your commonly-used modules and functions in "commonly_used.scad" and then include <commonly_used.scad>;
in the ".scad" file of your project.
If you really don't want to care about dependencies, include <dotSCAD.scad>;
or use <dotSCAD.scad>;
come to save you.
-
2D
-
3D
-
Transformation
-
Functon
-
Path
-
Extrusion
-
2D Shape
-
2D Shape Extrusion
-
Utilities
-
Matrix
-
Turtle
-
Pixel
-
Part
For bugs, questions and discussions please use the Github Issues.
I've been using OpenSCAD for years and created some funny things. Some of them include several important ideas and details. To prevent forgetfulness, I decided to write them down. Some examples developed in the documentation are useful so I elaborate them into this library.
The idea of the name dotSCAD comes from the filename extension ".scad" of OpenSCAD.