This software and instructions are provided as is, without warranty of any kind. This is a hobby project. Using this might damage your equipment, cause injury or death. Use at your own risk.
🇷🇺 перевод на русский 🇩🇪 Deutsche Übersetzung
Cheap DIY Electronic Lead Screw (ELS) based on Arduino Nano for metal lathes.
There are 2 hardware versions of NanoEls, H1 is older, H2 is newer and more capable.
NanoEls H1 | NanoEls H2 | |
---|---|---|
Metric pitches (+/-) | Yes, -10mm to 10mm, resolution 0.01mm | Yes, -10mm to 10mm, resolution 0.001mm |
Imperial pitches | Yes (specify in mm) | Yes (specify in mm) |
Position indication | Yes | Yes |
Angle indication | Yes | Yes |
Automatic stops | Yes | Yes |
Independent carriage moves | Yes | Yes |
Precision moves 1mm, 0.1mm and 0.01mm | Yes | |
Moving while ON | Yes | |
Big screen | Yes | |
Pluggable terminals | Yes | |
On/off switch | Yes | |
Disabling stepper when not in use | Yes | |
Example builds | Dididu12 Hedning003 HW61 kachurovskiy mockendon Sonny Madlangbayan wberggren WillieJilesen zabu83 |
kachurovskiy |
For H2, there's an imperial version of the software for users who mostly work with inches / TPIs at https://github.com/gstwrt/nanoels-imperial.
- Questions: please open a new GitHub Discussion
- Successful/failed builds: please file a GitHub Issue with explanations and photos
- Code changes: to maximize the chance of your PR being accepted, discuss the planned change beforehand
- Only make the necessary minimal edits
- Run in the
TEST
mode, add new tests if needed - Split unrelated changes into separate PRs
- PCB changes: please open a new GitHub Discussion
- 3D models: in most cases, don't edit the model, add a new file. PNG preview and a dimension would be nice too.
If you're willing to manufacture this device and/or sell it as a kit, we'd be happy to link to your page for free - especially if it makes the build cheaper than buying all the components separately.