StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the Pico Zero RP2040 that would make the user perform the advanced functions on it.
StackyPi consists of standard Raspberry Pi 40 pins on its board for Raspberry Pi HAT. One can plug Raspberry Pi HAT by directly putting it on the StackyPi that has the power pins for the connection. StackyPi is a board on which, clear and descriptive pin labels make the process easier for the user.
There is a printing error on the PCB of StackyPi version v1. CLK and RST text on the board is reversed; the real SWCLK or CLK pin is on the RESET side (bottom), the RST pin is on the CLK side (top), and SWIO or IO is on the centre.
- Now connect USB Cable on USB Port of Pico.
- Press boot button on stackypi then plug in computer. after that release the button.Open Thonny IDE and Choose interpreter as MicroPython (Raspberry Pi pico). Then click on install and update firmware
Or you can download the firmware from below link: https://micropython.org/download/rp2-pico/
- lcd_display_1.3_inch - this folder have two files
- 1._3_lcd_display.py - demo code of 1.3 lcd display
- firmware.uf2 - This is the firmware of lcd display.press boot button then plug usb to pc then release button ,you need to drag and drop the firmware to stackypi
- lora_home_automation - this folder have one file
- homeautomation.py - Run this file to control home appliances
- lora_receiver - this folder have two files
- lora_receiver.py - receiver code
- firmware.uf2 - lcd display firmware
- pi_relay6 - this folder have one file
- 6_channnel_relay.py - Run this file to control relay
- relay4_zero - this folder have one file
- relay_4_zero.py - Run this file to control relay zero
- rfid_hat - this folder have two files
- rfid_hat.py - Run this file to read rfid cards
- ssd1306.py - this is the library of oled display, save this file to stackypi
- round_lcd_1.28_hat - this folder have two files
- round_lcd_1_28.py - demo code of 1.28 round lcd display
- firmware.uf2 - This is the firmware of round lcd display, drag and drop the firmware to stackypi
- sd_card - this folder have three files
- sdcard.py - This is the library of sdcard onboard sd card module, save this file to stackypi. save this library inside pico
- firmware.uf2 - This is the firmware of round lcd display, drag and drop the firmware to stackypi
- main.py - you need to run this file to read/write sd card
- led_cube - inside this folder there is a file name "led_cube.py",run this file before this mount picube on the StackyPi