schote/nexus-console

Issues

• ISMRMRD Interface

  #74 opened 2 months ago by schote
  0

• Structure of Device Configuration and Setup

  #73 opened 5 months ago by schote
  0

• [BUG] Cannot acquire data with 4 channels simultaneously (3D TSE sequence)

  #63 opened 6 months ago by LUMC-LowFieldMRI
  3

• Sampling rate for RF and gradients

  #71 opened 6 months ago by schote
  0

• Long calculation time for decimation

  #70 opened 6 months ago by schote
  0

• [ONGOING] Documentation of the Project

  #43 opened a year ago by schote
  0

• Phase instability during and between acquisitions

  #66 opened 7 months ago by LUMC-LowFieldMRI
  3

• Memory usage increases substantially after unrolling the sequence, when starting the acquisition.

  #64 opened 7 months ago by LUMC-LowFieldMRI
  1

• [BUG] Digital outputs are temporarily high at startup

  #54 opened 9 months ago by schote
  2

• [BUG] Sequence fails to execute fully, all events happen at once?

  #57 opened 9 months ago by LUMC-LowFieldMRI
  1

• [BUG] Truncation of RF pulse amplitude

  #50 opened 8 months ago by schote
  2

• [BUG] Gradient offsets are not being set correctly since updating to global parameters

  #61 opened 8 months ago by Toreil
  1

• Global acquisition values

  #56 opened 8 months ago by schote
  0

• Revision of gradient offsets implementation

  #58 opened 8 months ago by schote
  6

• Setter for sequence in acquisition control?

  #51 opened 9 months ago by schote
  0

• Sequence calculation during execution time

  #52 opened 10 months ago by schote
  0

• Example from readme does not run

  #34 opened a year ago by hiddendb
  1

• [BUG] Unable to open spectrum-cards when switching user

  #49 opened 10 months ago by schote
  0

• Use Ruff for linting

  #36 opened a year ago by schote
  0

• Implementation of Unittests

  #44 opened 10 months ago by schote
  0

• BUG: Missing Gate Windows?

  #40 opened a year ago by schote
  1

• Automatic Rx buffer adjustment depending on expected receiver buffer?

  #42 opened a year ago by berksilemek
  1

• Comparison of DDC functions

  #20 opened a year ago by schote
  0

• BUG: Number of raw readout samples varies between gates

  #31 opened a year ago by schote
  1

• Readout to numpy array

  #21 opened a year ago by schote
  1

• Apply gradient correction independent of the sequence?

  #33 opened a year ago by schote
  1

• BUG: Enabling more then two channels is not possible

  #30 opened a year ago by schote
  3

• Implementation of TSE

  #26 opened a year ago by schote
  0

• Append to existing log file in session

  #28 opened a year ago by schote
  0

• Add system settings to meta information of acquisition data

  #32 opened a year ago by schote
  0

• Update phase correction

  #17 opened a year ago by schote
  0

• Implementation of AcquisitionData class

  #15 opened a year ago by schote
  0

• Update pypulseq version

  #13 opened a year ago by schote
  0

• BUG: Unrolling of gradients, total samples > gradient samples

  #12 opened a year ago by schote
  1

• Implementation of logging mechanism

  #8 opened a year ago by schote
  0

• Phase alignment of transmit and receive card

  #9 opened a year ago by schote
  1

• Implementation of gradient DC offsets

  #22 opened a year ago by schote
  0

• Prepare calibration sequences for Leiden scans

  #24 opened a year ago by schote
  0

• Write RF and gradient waveform in place

  #18 opened a year ago by schote
  0

• BUG: When unrolling TSE sequence unblanking signal is incorrect

  #10 opened a year ago by schote
  3

• Implementation of acquisition control

  #7 opened a year ago by schote
  0

• Loading device configuration

  #3 opened a year ago by schote
  0

• Implementation of RF unblanking

  #5 opened a year ago by schote
  0

• Implementation of TS polling for RX

  #4 opened a year ago by schote
  0

• Fix linter issues

  #2 opened a year ago by schote
  0