Don't use on an existing installation. Theoretically, it can work, but theoretically I could become a millionaire.

What is effuvv?

effuvv is "functional arch". It allows (and requires) you to express your arch linux installation in the terms of a function of a configuration. Essentially, you have a set of configuration files that you would normally edit, such as /effuvv/etc/fstab and /effuvv/etc/default/grub, and a main config file, /effuvv/effuvv_config.js that specifies how everything should be bound together, and a tool, effuvv-sync, that makes sure the system reflects your configuration.

WARNING

This is super pre-alpha stuff. I'm using it on my systems, but seriously new bugs are being found every day. It's usable, but only if you wanna tinker. Hopefully one day I can remove this warning but I don't know if it'll come. That being said, it's not that scary once you get the hang of it.

Prior art / Rationale

NixOS is a big influence in this project. NixOS makes the functional operating system perfect; that is, everything fits perfectly into the NixOS world. The downside of this perfection is that it's not an easy to transfer an existing linux skill set into working NixOS skills.

I wanted a tool that let me express my archlinux system in terms of a single set of configuration files / directives, similar to NixOS, but one that didn't require me to throw away all the time and energy that has gone into building such a great distro like Arch.

Tutorial

Arch Install Guide: https://wiki.archlinux.org/index.php/installation_guide

Follow the Arch Install Guide up to the part about pacstrap. Do pacstrap /mnt base (just base, nothing more as we want to only have the most minimal outside-of-effuvv system possible), and then chroot into the new install. Immediately do this:

# cd /tmp
# curl -L http://effuvv-pkg.shawndellysse.com -o effuvv.tar.xz
# pacman -U effuvv.tar.xz
# rm effuvv.tar.xz
# effuvv-init

Now effuvv is intalled on your system. effuvv-init has created an extremely basic skeleton configuration. Now we're going to follow the next few steps of the install guide, but showing how they're done in effuvv.

First step, let's deviate from the guide for a moment and install vim. We're doing this now to both show the packaged installation workflow and also to fix the fact that Arch sets $EDITOR to that by default, even though it's not installed by default. Run

# EDITOR=vi effuvv-edit -c

to open the effuvv configuration in vi.

Scroll down to the packages array, and add "vim", to the end of the array:

exports.packages = [
  {external: "effuvv"},
  {group: "base"},
  //{group: "base-devel"},

  "vim",
]

Note the quotes and the trailing comma in "vim",. The quotes are necessary, and while the trailing comma isn't necessary, it makes it easier to add more entries later without having to remember to add the comma to the last entry so unless you have a strong opinion otherwise I suggest you add it. You can also take this time to uncomment the base-devel group if you like. Note the special syntax for specifying packages groups that should be on the system, and ignore the external clause for now, we'll get to that later. (TODO Later Text: external clauses mark packages that aren't controlled by this tool. Examples are effuvv, which was installed from a url, and AUR packages. You need to add them here so that effuvv doesn't remove them or their dependencies when effuvv-sync is ran.)

Close vi and run effuvv-sync. This is the only effuvv command that alters your system. This execution of it should see that you want vim to be installed, and right now it isn't, and it should bring the system in line with what your configuration demands.

Fstab

The next step in the guide is to append some generated stuff to the fstab. In effuvv, we don't touch anything outside /effuvv or /home (or other state directories), so let's pull fstab into our config.

# effuvv-edit -n /etc/fstab

effuvv-edit copies a file from the system into the correct place of the config (in this case it gets placed in /effuvv/etc/fstab) and lets you edit the file. In this case, we don't want to edit the file right now, so we pass -n to tell it not to run $EDITOR.

Exit the chroot and append the generated entries to our config:

# genfstab -U /mnt >> /mnt/effuvv/etc/fstab

Re-enter the chroot and check the file.

# effuvv-edit /etc/fstab

Now we need to tell the configuration to install this file. Run

# effuvv-edit -c

and in the install array of the afterPackages clause, add the file:

exports.afterPackages = async ({ install, run, changes }) => {
  await install([
    "/etc/fstab",
  ])
}

This goes in the afterPackages clause due to it not being something that pacman needs set up to run. Generally, most file installs will go here, with only things like pacman configs, networking, timezones / locales, etc will go in the beforePackages clause.

Time Zone

Next step in the guide is to set the time zone. For this, we don't want to copy a file from the system:

# ln -sf /usr/share/zoneinfo/Region/City "$( effuvv-edit -d -p /etc/localtime )"

This line creates a symlink to the City you specify into the right location in the configuration. effuvv-edit -d -p's -d doesn't actually copy the file from the system but instead just gets the configuration's directory structure ready, and the -p prints the location of where the file would be in the configuration instead of attempting to edit it. We combine this with shell subsitition for nicety.

Don't forget, we need to add it to the beforePackages clause:

exports.beforePackages = async ({ install, run, changes }) => {
  await install([
    "/etc/pacman.conf",
    "/etc/pacman.d/mirrorlist",
    "/etc/localtime",
  ])

  if (changes.files["/etc/localtime"]) {
    await run("hwclock --systohc")
  }
}

What's this if-clause you ask? Looking at the Arch install guide, after installing /etc/localtime, you want to run a command. This if-clause checks to see if the file got installed (it will get installed this first run, but it won't get re-installed on subsequent runs unless the file in the configuration is changed).

Locale

Let's repeat the same process for the locale. I'm going to do less hand-holding here now that we have the pattern down.

Copy the file to the configuration and make your changes:

# effuvv-edit /etc/locale.gen
# effuvv-edit /etc/locale.conf

Update the beforePackages clause:

exports.beforePackages = async ({ install, run, changes }) => {
  await install([
    "/etc/pacman.conf",
    "/etc/pacman.d/mirrorlist",
    "/etc/localtime",
    "/etc/locale.gen",
    "/etc/locale.conf",
  ])

  if (changes.files["/etc/localtime"]) {
    await run("hwclock --systohc")
  }
  if (changes.files["/etc/locale.gen"]) {
    await run("locale-gen")
  }
}

Hostname

Note that if the file doesn't exist on the system, effuvv-edit will create one in the configuration:

# effuvv-edit /etc/hostname
# effuvv-edit /etc/hosts

Add both of these files to the beforePackages clause.

Network Configuration

Should be able to tackle this yourself now

Initramfs

How I handle this is like this, if you need to have a custom initramfs:

# effuvv-edit /etc/mkinitcpio.conf

afterPackages clause looks something like this:

exports.afterPackages = async ({ install, run, changes }) => {
  await install([
    // stuff...
    "/etc/mkinitcpio.conf",
  ])

  if (changes.files["/etc/mkinitcpio.conf"]) {
    await run("mkinitcpio -p linux")
  }
}

This way the initramfs will only be rebuilt if you change the source file.

Users and Passwords

Okay this is pretty cool. Included in effuvv is a tool that generated encrypted password strings, effuvv-mkpasswd. Protip: to get that big string into the configuration without copy and paste, close your editor and do:

# effuvv-mkpasswd >> /effuvv/effuvv_conf.js
# effuvv-edit -c

The password hash will now be at the end of the file. Move that string up inside the quotes in the right stanza to set the password of a user.

exports.usersAndGroups = {
  users: {
    root: {
      encryptedPassword: "sdfhuyiurwyeiurywuioeryuioqyuiysdouivyxuozicyvuoiysu",
    },
    
    shawn: {
       encryptedPassword: "wuqeporiuqicxuvppisaufwepiuvpuzxpioupwe",
       groups: [ "wheel" ],
    },
  },
}

effuvv-sync will then make sure that the users in the system match the users in the configuration.

Boot loader

Grub EFI example:

exports.packages = [
  // stuff...
  "grub",
  "efibootmgr",
]

exports.afterPackages = async ({ install, run, changes }) => {
  // stuff...

  if (changes.packages.added["grub"]) {
    await run("grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=grub")
    await run("grub-mkconfig -o /boot/grub/grub.cfg")
  }
}

This will install grub package and on package-install, install grub as the boot loader. This can be easily extended to have a grub config file managed by the configuration, and have these commands run whenever it's installed or those are changed as well:

exports.afterPackages = async ({ install, run, changes }) => {
  await install([
    // stuff...
    "/etc/default/grub",
  ])

  if (changes.packages.added["grub"]) {
    await run("grub-install --target=x86_64-efi --efi-directory=/boot --booloader-id=grub")
  }
  if (changes.files["/etc/default/grub"]) {
    await run("grub-mkconfig -o /boot/grub/grub.cfg")
  }
}

Sudoers

# EDITOR="visudo -f" effuvv-edit /etc/sudoers

Services

To start and enable-at-start a service, add it to the services clause:

exports.services = [
   "NetworkManager.service",
   "lightdm.service",
]

To stop and disable-at-start a service, remove it from the clause.

sdellysse/effuvv

What is effuvv?

WARNING

WARNING

Prior art / Rationale

Tutorial

Fstab

Time Zone

Locale

Hostname

Network Configuration

Initramfs

Users and Passwords

Boot loader

Sudoers

Services