YABLO

Yet Another Battery Life Optimizer for Linux 🐧

Yablo reduces the energy consumption of the CPU by automatically setting the CPU governor and Turbo Boost dependend on the battery state and system load. It is highly inspired by auto-cpufreq. The application is written in Rust.

Features

automatically sets CPU governor dependend on battery state and load
automatically activates or deactivates Turbo Boost dependend on battery state and load
saves energy by reducing the power consumption by the CPU

CLI

Available flags

-d, --debug: Shows debug/system info
-h, --help: Prints help information
-l, --live: Prints information and applies suggested CPU optimizations
--log: View live CPU optimization log made by daemon
-m, --monitor: Suggests CPU optimizations for the current load
-u, --update-config: Reloads the systemd daemon
-V, --version: Prints version information

Config

The configuration file is stored at /etc/yablo/config.toml. It allows setting the following parameters separately for the battery states plugged_in and on_battery

On AC power (`plugged_in`)

governor (String): sets the default governor for low system load
turbo (Bool): allows disabling Turbo Boost to save energy
second_stage_governor (String): sets a different governor for high system load or CPU usage. Can be used to compensate for a disabled turbo boost when running on battery (optional, default: performance)
turbo_delay (Integer): sets the delay in seconds before the Turbo gets activated (optional, default: 0)
loadperc_threshold (Float): sets the threshold value for the cpu load (optional, default: 20.0)
loadavg_threshold (Float): set the threshold value for the load average (optional, default: (50.0 * num_cpus)/100.0)

On Battery power (`on_battery`)

governor (String): sets the default governor for low system load
turbo (Bool): allows disabling Turbo Boost to save energy
second_stage_governor (String): sets a different governor for high system load or CPU usage. Can be used to compensate for a disabled turbo boost when running on battery (optional, default: powersave)
turbo_delay (Integer): sets the delay in seconds before the Turbo gets activated (optional, default: 0)
battery_threshold (Integer): sets the threshold value for the battery capacity to limit the energy consumption on load battery states - turbo completly disabled (optional, default: 0)
low_battery_governor (String): sets the governor that is used on low battery states (optinal, default: powersave)
loadperc_threshold (Float): sets the threshold value for the cpu load (optional, default: 30.0)
loadavg_threshold (Float): set the threshold value for the load average (optional, default: (75.0 * num_cpus)/100.0)

Default config

# /etc/yablo/config.toml
[plugged_in]
governor = "performance"
turbo = true

[on_battery]
governor = "powersave"
turbo = true

Installation

Install script

The easiest way is to use the install script. It checks for system compatability and installs all the components. It also prompts if you want to start and enable the systemd service to have yablo always running.

git clone https://github.com/sebastian-xyz/yablo.git
cd yablo
sudo ./install_script $(whoami)

The install script allows to choose between the compilation of the binary locally or downloading it from GitHub and check the integrity using a hashsum. It also deploys a remove script in the PATH to remove the whole program without manual intervention. Just run yablo_remove everything will be removed.

Note: The username is necessary for the installation if the binary is not compiled locally to avoid downloading the binary as root.

sebastian-xyz/yablo