Bluetooth Low Energy command line tool for macOS.
- Scan BLE devices
- Establish a serial TTY connection to a BLE device
- (more planned is planned, but this is v0.3)
mint install mickeyl/core-bluetooth-toolbrew tap mickeyl/formulae
brew install core-bluetooth-toolSince this application uses Bluetooth, you need to grant Bluetooth access to your favorite terminal emulator before
running core-bluetooth-tool. Otherwise, the application will be halted by the OS.
Scan all BLE devices in vicinity (broken in macOS Monterey < 12.3, earlier and newer versions OK):
core-bluetooth-tool scanScan all BLE devices in vicinity providing a certain service, e.g. with a UUID of FFF0:
core-bluetooth-tool scan fff0Establish a serial bridge to the first BLE device providing a serial communication service, e.g., with a UUID of FFF0:
core-bluetooth-tool bridge fff0Establish a serial bridge to a concrete BLE device providing a serial communication service, e.g., with a UUID of FFF0:
core-bluetooth-tool bridge fff0 F890A301-A464-D37C-AAFB-9374B546F7FEFor my work on car diagnosis apps like OBD2 Expert, I have been writing a lot of code to communicate
with various kinds of serial OBD2 adapters. The most common technologies here are USB (ftdi232), WiFi, Bluetooth 3.x (rfcomm), and – more recently – Bluetooth Low Energy (BLE).
While (of course) I have code that interacts with such devices, it's always important to be able to directly communicate with an adapter.
This is no problem with USB, WiFi, and Bluetooth 3.x communication, as we already have tools like minicom, picocom, and ncat to our disposal.
For Bluetooth Low Energy devices though, this has always been kind of a hassle. In contrast to Bluetooth 3.x, the serial port is provided
through a service providing one or two BLE characteristics, one readable, and one writable.
That's why I wrote the bridge subcommand, which opens a pseudo tty and allows you to use a terminal program to seamlessly interact with the device.
And while I was there, I figured I'd extend this to facilitate more tools.
I want to extend this tool in order to handle all the common tasks typically associated with Bluetooth Low Energy devices, such as
- scanning and printing services
- scanning and printing characteristics
- scanning and printing descriptors
- trigger bonding (by reading from an encrypted characteristic)
- subscribing to a characteristic and continously printing the output
- reading and writing to/from a characteristic
It would also be nice to have kind of a readline-based REPL, where you directly interact with one device.
I could even imagine an ncurses-alike interface (such as htop is presenting) for showing the signal strength of devices in vicinity.
It might also be interesting to evaluate PureSwift/BluetoothLinux in order to make this tool work on Linux.
Please use under the terms of the MIT license. As always, I welcome any form of contribution.