/Hi-Link_mmWave_Radar_ESPHome

Hi-Link LD1115H, LD1125H, LD017, LD016 mmWave Radar with ESPHome Example Code

Hi-Link mmWave Radar For ESPHome

Suggest used ESP-IDF framework to improve efficiency and stabilized.
If using Arduino Framework, disconnect the UART cable might cause API error(disconnect).

Current Support:

✅ LD1115H UART/GPIO output, UART with sensitivity adjustable >Link
✅ LD1125H UART output, UART with sensitivity adjustable >Link
❎ LD2410 UART/GPIO output, UART with sensitivity adjustable
✅ LD112 GPIO output without adjustable >Link
❎ LD017 IIC/GPIO output, IIC/GPIO for sensitivity adjustable
❎ LD016 GPIO output, UART for sensitivity adjustable
❎ LD012 GPIO output with sensitivity adjustable pins

CEM5825F = LD1125H
CEM5855H = LD1115H

Code at each Radar Folder
Note: Don't use 5V on LD017 and LD012

Reference:

ESPHOME:
https://esphome.io/cookbook/uart_text_sensor.html
https://esphome.io/custom/uart.html
https://esphome.io/components/uart.html
https://esphome.io/components/sensor/custom.html