selfbus/software-arm-incubation

Issues

• RM-bcu1: VD issues and enhancements

  #59 opened 9 months ago by dallmair
  0

• RTR_lcd... symbol `__GNAXBOARD__` not used

  #63 opened 9 months ago by Darthyson
  0

• RM-bcu1: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #44 opened 9 months ago by Darthyson
  1

• Bootloader should boot into existing app after some time, and also after a failed unlock attempt

  #56 opened 10 months ago by dallmair
  0

• Bootloader must not enter programming mode when started from running app

  #55 opened 10 months ago by dallmair
  0

• bcu.begin(..) should be called last in setup()

  #38 opened 2 years ago by Darthyson
  3

• RM-bcu1: Summierung der RM-Werte immer Null nach Busspannungsausfall

  #13 opened 5 years ago by Doumanix
  8

• RM-bcu1: Periodic sending of Group Objects 0, 1, and 5 does not work (Alarm network, Test alarm network, Test alarm status)

  #49 opened a year ago by dallmair
  1

• RGBswitch_6_bcu1: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #43 opened a year ago by Darthyson
  0

• out8-dimmer: 2 build configs won't compile

  #46 opened a year ago by Darthyson
  0

• in8-bcu1: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #42 opened a year ago by Darthyson
  0

• in16-bim112: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #41 opened a year ago by Darthyson
  0

• out8-bcu1: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #40 opened a year ago by Darthyson
  0

• dim4-bim112: Don't use `delay()` or `Timeout` in `setup()`/`initApplication()`

  #39 opened a year ago by Darthyson
  0

• Rauchmelder-bcu1: conv_dpt_9_001 ignores sign

  #31 opened 2 years ago by Darthyson
  0

• out8-bcu1 with set read/update flag on ETS-Objects 0-7, out8 is sending telegrams forever

  #22 opened 2 years ago by Darthyson
  0

• MultiSensorAktor: Eingang Pullup/Pulldown vertauscht?

  #33 opened 2 years ago by maramend
  1

• MSA: configuring SHT2x leads to hardfault

  #35 opened 2 years ago by gnampf1
  1

• Schaltimpuls für Ausgang MultiSensorAktor

  #34 opened 2 years ago by maramend
  0

• Statusobjekt für Output Multi Sensor Aktor

  #32 opened 2 years ago by maramend
  0

• in16-bim112 leds on spi-port not working

  #30 opened 2 years ago by Darthyson
  0

• rol-jal-bim112 doesn't check for possible locks

  #28 opened 3 years ago by Darthyson
  0

• rol-jal-bim112: Timer timeout not starting/triggering in case the extMoveTime is set in ETS to none (0%)

  #23 opened 3 years ago by Darthyson
  0

• out8-bcu1: detection of bus voltage fail not implemented

  #21 opened 4 years ago by Darthyson
  0

• in16-bim112 non invert version sends no telegram on start-up

  #19 opened 4 years ago by Darthyson
  0

• Spannungsanzeige: Manchmal zeigt das RM-Modul falsche Spannungswerte an

  #12 opened 4 years ago by Doumanix
  9

• Only first group address is sent after trigger

  #11 opened 5 years ago by Doumanix
  2