Implements WiFi streaming for SSI spec for the IMU for the M5StickC
This is an Arudino Sketch for the M5StickC that enables streaming the IMU (Acc,Gyro) data out over Wi-Fi following the SensiML Simple Stremaing interface specification. This can be used in conjuction with the SensiML Data Capture Lab or the SensiML Gateway to view/record the data stream.
You will need the m5Stick SDK in order to run this https://github.com/m5stack/M5StickC. Instructions for getting setup with the m5Stick SDK on the Arduino IDE are here https://docs.m5stack.com/en/arduino/arduino_development
You can connect directly with the open gateway. Use the m5_stick.ssf if you want to capture data via the Data Capture Lab.