Issues
- 0
Change to maintained fork of hidapi
#74 opened by MrAureliusR - 2
PICkit 3 scripting firmware
#73 opened by hinxx - 1
Is 2-wire ICSP port interface supported?
#71 opened by hinxx - 3
PICKit 5 support
#72 opened by hinxx - 8
Program hangs??
#48 opened by mpavlica - 0
- 0
- 1
- 2
- 1
pickit3 is not recognized
#62 opened by igagis - 1
Make err for Linux
#61 opened by JihunDev - 0
Use of libhidapi-libusb
#59 opened by andy-preston - 0
pic32prog v.2.0.220 does not recognize my pickit2
#57 opened by igor-m - 1
MPSSE only works with low TCK frequencies
#55 opened by Neofoxx - 0
cant flash Nuttx binary to UBW32 board - Program flash: address 1d000000 out of program area
#54 opened by satheesh-ks - 3
Linux GPIO adapter
#29 opened by majenkotech - 1
- 11
pic32mm and mk support
#47 opened by cb88 - 3
Documentation on updating a PICkit3
#49 opened by cladmi - 0
Make error on Mac
#46 opened by andrewjaykeller - 1
segmentation fault when selecting baud rate
#27 opened by nroff-man - 2
Can not program old uC32 and UNO32 boards
#34 opened by EmbeddedMan - 2
Fails to verify with latest UNO32 bootloader
#36 opened by EmbeddedMan - 5
- 0
- 2
Windows DTR handling needs updating
#33 opened by EmbeddedMan - 0
pic32prog with pged3/pgcd3 not working
#31 opened by tsupplis - 1
Make it modular
#30 opened by majenkotech - 2
stk500v2 programmer support part 2
#28 opened by nroff-man - 2
stk500v2 programmer support.
#1 opened by nroff-man - 0
No target found on OS X with Wi-Fire board
#26 opened by sevan - 1
- 2
pic32prog.conf file
#23 opened by robert-rozee - 4
printf output buffered, is this as intended?
#19 opened by robert-rozee - 1
- 1
Missing CPU definitions
#15 opened by majenkotech - 8
- 1
adapter-uhb.c - undeclared
#3 opened by Manouchehri - 7
segmentation fault when loading file from macosx
#10 opened by ricklon - 8
Compile error for Mac OS X
#11 opened by rianders - 1
Unable to get adapter for locked device
#8 opened by majenkotech - 2
PIC32MZ2048ECM100 programming issue.
#6 opened by jaromir-sukuba