sflow/host-sflow

Issues

• Newer builds for RHEL-8 based distros

  #60 opened 9 months ago by pavel-odintsov
  4

• The agentIP selection is wrong when multi devices have same IPv4/IPv6 address

  #61 opened 9 months ago by shuaishang
  5

• No out interfaces on flows

  #67 opened 6 months ago by Pelt10
  1

• mod_psample, mod_dropmon drops samples larger than 8124 bytes

  #62 opened 6 months ago by bluecmd
  6

• double disk stats computed

  #64 opened 7 months ago by nicolasb827
  1

• Ability to use tunnel interfaces like GRE for sFlow

  #65 opened 7 months ago by sever-sever
  2

• FreeBsd Pcap conf error

  #57 opened a year ago by ederwander
  2

• Issues running host-sflow on Windows hyper-v

  #58 opened a year ago by limpens
  0

• FreeBSD Makefile problem with json.

  #21 opened 8 years ago by lagagne
  2

• How to modify and collect custom protocols？

  #56 opened a year ago by tongchenqiang
  4

• FR: set source ip

  #55 opened a year ago by asy972
  4

• Version 2.0.51-17 does not work with bonding

  #54 opened a year ago by MiniPierre
  5

• Question for the sampling rate

  #53 opened 2 years ago by luocooong
  4

• Incorrect tag version

  #52 opened 2 years ago by sever-sever
  0

• Version 2.0.50-3 not compatible with Debian 10

  #51 opened 2 years ago by MiniPierre
  1

• Total traffic Values are not accurate

  #50 opened 2 years ago by ramsh123
  1

• sflowtool is not showing any samples output

  #48 opened 3 years ago by kishanps
  1

• hsflowd[2344]: SFF8036 ethtool ioctl failed: No such device

  #46 opened 3 years ago by mehrdade
  7

• hsflowd does not work on Debian 11

  #47 opened 3 years ago by mehrdade
  4

• No ulog/nflog sampling on arm7

  #39 opened 3 years ago by lspgn
  1

• How to handle TAP Traffic

  #42 opened 4 years ago by fionera
  1

• [linux] agent.cidr ignores secondary IPv4 addresses

  #40 opened 4 years ago by toreanderson
  6

• outputPort is always 0 in flow samples

  #41 opened 4 years ago by mayuresh82
  7

• No flowsamples sent on Debian 9.12

  #38 opened 5 years ago by AlberichVR
  2

• cannot start hsflowd on /proc hardened folder

  #37 opened 5 years ago by bigHosting
  2

• Centos 8 support

  #36 opened 5 years ago by bigHosting
  3

• hsflowd is listening to a RANDOM UDP after every restart

  #34 opened 5 years ago by nidotech
  1

• Crashing on some nodes

  #33 opened 5 years ago by dimm0
  6

• Broken line parsing in readInterfaces

  #32 opened 5 years ago by carlanton
  3

• send flow data to local unix socket (e.g. rsyslog)

  #30 opened 6 years ago by eXtrem0us
  1

• Incorrect data(CPU utilization) for KVM and Host in CentOS 7

  #29 opened 6 years ago by MyungChi
  0

• Dynamic sampling rate for 10Gbps

  #26 opened 7 years ago by nidotech
  5

• KVM monitoring is not work on CentOS 7

  #28 opened 6 years ago by MyungChi
  6

• Dose host sflow follow sflow v5 rfc?

  #27 opened 6 years ago by macauleycheng
  1

• It is not possilbe to install the hsflowd-eos-2.0.11-1.x86_64.rpm on an Arista switch

  #25 opened 7 years ago by mmailand
  0

• Support configuration to allow picking discrete set of interfaces to turn on sflow in addition to the regex based approach

  #17 opened 7 years ago by yevvievvy
  14

• NIC sflow stream per collector

  #24 opened 7 years ago by nidotech
  3

• Configuration file

  #1 opened 8 years ago by willemdh
  1

• Sampling rate doesn't get programmed if sflow is enabled on pre-provisioned bonds

  #22 opened 8 years ago by yevvievvy
  4

• 32bit/i686 __stack_chk_fail_local compile error

  #23 opened 8 years ago by acoul
  1

• not building on Darwin

  #18 opened 8 years ago by paralax
  7

• Unvalid flow data

  #2 opened 8 years ago by willemdh
  2

• Linux port does not compile 2.0.2/2.0.3

  #12 opened 8 years ago by doctaweeks
  2

• Support for musl

  #13 opened 8 years ago by Bun
  2

• PCAP + Linux possible race condition

  #16 opened 8 years ago by Bun
  1

• Missing docker vir_* metrics when using hsflowd as a container

  #15 opened 8 years ago by moss2k13
  4

• No VM disk statistics

  #11 opened 8 years ago by fumok
  6

• I can't see container graphics on my Ganglia

  #6 opened 8 years ago by raimonbosch
  10

• sys uptime should be more accurate

  #3 opened 9 years ago by elianka
  6

• it seems hsflowd don't re-read configure file

  #4 opened 9 years ago by elianka
  4