HyperPixel 2.0r is an 480x480 pixel display for the Raspberry Pi, with optional capacitive touchscreen.
These drivers are for the Raspberry Pi 4 specifically, and include new tools to take advantage of the "Screen Configuration" (xrandr) support that Pi 4's 3D accelerated desktop enables.
First, clone this GitHub repository branch to your Pi:
git clone https://github.com/pimoroni/hyperpixel2r
Then run the installer to install:
cd hyperpixel2r
sudo ./install.sh
To keep your touchscreen rotated with the display, you should rotate HyperPixel2r using the hyperpixel2r-rotate command rather than "Screen Configuration."
This command will update your touch settings and screen configuration settings to match, and you can rotate between four modes: left, right, normal, inverted.
- left - landscape, power/HDMI on bottom
- right - landscape, power/HDMI on top
- normal - portrait, USB ports on top
- inverted - portrait, USB ports on bottom
If you want to change the position of your HyperPixel2r in a multi-display setup, you can use "Screen Configuration" as normal.
Touch is only supported via the Python library - https://github.com/pimoroni/hyperpixel2r-python