shamansystems/Cheap-FOCer-2

Issues

• problem with missing parts from the Bom or CPL file

  #52 opened 5 months ago by asken92
  0

• Anyone selling with US stock?

  #51 opened 6 months ago by rusefillc
  0

• It is posible to add step/dir interface??

  #50 opened 10 months ago by artayasa
  0

• Cheap FOCer 3 worth waiting?

  #46 opened 2 years ago by okhsunrog
  1

• 5V voltage issue

  #49 opened a year ago by Tank1989
  0

• Update links

  #48 opened 2 years ago by okhsunrog
  0

• question about replacement

  #47 opened 2 years ago by okhsunrog
  0

• Is the README correct that Cheap-FOCer-2 still hasn't been merged into VESC?

  #39 opened 3 years ago by kubark42
  2

• NOOB question: I cant find any 2W version of R57-R61 on LCSC/JLCPCB.

  #45 opened 2 years ago by Meserlion
  6

• Safe to leave out BMI160 attitude sensors?

  #43 opened 2 years ago by wait-what
  2

• STM32 Placement Rotation unclear

  #44 opened 2 years ago by probstn
  1

• Replace drv8301 with drv8302

  #35 opened 4 years ago by L4stIdi0t
  1

• Error in the assembly readme.md for diode placement

  #42 opened 2 years ago by Richie6988
  0

• Updated BOM

  #41 opened 2 years ago by DFlak
  0

• Replacement of parts

  #40 opened 3 years ago by snapo
  3

• is it possible to change mosfet n channel ncep60t20 to mosfet n channel irf3205

  #38 opened 3 years ago by artayasa
  1

• out of stock parts

  #37 opened 3 years ago by cloudsrule9
  1

• Found STM32F405VGT6 still in stock.

  #36 opened 4 years ago by xromansx
  0

• V 1.0

  #32 opened 4 years ago by vfear
  1

• 200A / 12 FET version.

  #34 opened 4 years ago by xromansx
  12

• BMI160 Out of Stock at https://lcsc.com/

  #23 opened 4 years ago by unRARed
  4

• DRV8301, TJA1051T/3/1J, SMF05CT1G are out of stock aswell as BMI160

  #29 opened 4 years ago by L4stIdi0t
  1

• STM32F405RGT6/7 alternatives.

  #33 opened 4 years ago by BigHuz
  3

• Max 5v current? And other specs?

  #31 opened 4 years ago by astra404
  0

• Hall sensor positioning not vorking with howerboard motor

  #30 opened 4 years ago by astra404
  1

• Cleaning the finished pcb

  #28 opened 4 years ago by astra404
  2

• What is the minimal voltage for vesc control pins(gpio, uart ect.)?

  #27 opened 4 years ago by astra404
  4

• Fault LED blinks 16 times - FAULT_CODE_HIGH_OFFSET_CURRENT_SENSOR_1

  #26 opened 4 years ago by Fisatec
  1

• conf_general.h refers to hw_FOCer.c while ref to hw_FOCer_2.c commented out

  #15 opened 5 years ago by shanghaijo
  7

• 63ZLJ330M10X20 Out of Stock at https://lcsc.com/

  #24 opened 4 years ago by unRARed
  6

• Lifting the nose when the speed is set

  #22 opened 4 years ago by vfear
  0

• Component at U2 - (DRV8301) is not avialable

  #20 opened 4 years ago by shraygoswami
  2

• 2 motors

  #21 opened 4 years ago by vfear
  1

• Ordering instructions differ from board-front pic shown in assembly guide

  #19 opened 4 years ago by powneill
  1

• Net C17-Pad2 Connections

  #18 opened 5 years ago by SRFirefox
  3

• I was told by JLCPCB that they will no longer order more DRV8301 and found some potential problems with DRV8301

  #17 opened 5 years ago by victordlee
  5

• Link to bootloader is broken

  #16 opened 5 years ago by TechnikWeber
  2

• Wrong firmware

  #13 opened 5 years ago by charclo
  1

• Very slow firmware update over usb (Mac)

  #14 opened 5 years ago by charclo
  1

• STEP model is deprecated

  #12 opened 5 years ago by MayorBug
  0

• Is 50.4V(12s) the hard limit?

  #11 opened 5 years ago by juodumas
  1

• B6B-PH-K-S(LF)(SN) Discontinued

  #3 opened 5 years ago by Helno
  7

• Schematics in PDF

  #5 opened 5 years ago by Peemouse
  2

• U1/AMS1117-3.3 and other zero rotation error in JLCPCB

  #4 opened 5 years ago by hackerboygn
  2

• nRF51 using Windows

  #7 opened 5 years ago by MegaC-C
  4

• bootloader

  #6 opened 5 years ago by MegaC-C
  1