*********************** ABOUT queryperf++ ********************** queryperf++ is a framework for performance measurement on DNS server implementations. It offers the following major features, some of which are unique to queryperf++ as far as the author knows: - It supports both UDP and TCP as the transport protocol. In particular, it can be used to measure server performance on AXFR or IXFR over TCP. - It allows multiple threads to send test queries to the tested server in concurrent. It will help get more reliable results on performance of some very high-performance server implementations or in test scenarios that require more complicated tasks at the querier side. - It's designed to be modular and extendable. The main tasks for the tests such as generating query and handling queries and responses are implemented as a separate library, and some part of them can be dynamically extended using user-defined C++ classes. As a framework, queryperf++ consists of two components: the library named libqueryperf++ and the main executable program, queryperf++. For those who just want to perform basic performance tests on a specific server implementation, it should be sufficient to just build everything and run the queryperf++ program. Those who want to conduct more customized test scenarios can extend or update the library and build their own test programs. *********************** DEPENDENCIES *********************** queryperf++ depends on the C++ DNS library provided as part of ISC BIND 10 (which is available at ftp://ftp.isc.org/isc/bind10/). It also depends on the Boost C++ library (only header files are needed, available at http://www.boost.org/), and the default implementation uses the ASIO library (non Boost, header only version; available at http://think-async.com/) for network I/O and timer management. Since BIND 10 itself depends on both Boost and ASIO, queryperf++ essentially only depends on BIND 10. See the next section for more specific details on how to build it. ******************** HOW TO BUILD queryperf++ ********************* As noted in the previous section, queryperf++ depends on ISC BIND 10. You'll first need to get, build, and install it. We refer to the installation directory of BIND 10 as ${BIND10_INSTALL_DIR} below (so, for example, the binary file of libdns++ should be found at ${BIND10_INSTALL_DIR}/lib). Also, as of this writing, installed header files of BIND 10 are not sufficient to build third party applications like queryperf++. So, in practice, you'll also need to have an extracted source tree of BIND 10 somewhere and have queryperf++ look for some header files there. We refer to the top directory of the BIND 10 source tree as ${BIND10_SRC_DIR}. So, for example, you should be able to find a header file named name.h under ${BIND10_SRC_DIR}/src/lib/dns. Note that you first need to build BIND 10 in the source tree because some of the necessary header files are dynamically generated during the build process. If you have successfully built BIND 10, you should already have Boost installed somewhere in your system (note, again, that queryperf++ only needs Boost header files). We refer to the install directory where the 'boost' subdirectory is located as ${BOOST_HEADER_DIR}. You should be able to find a file named version.hpp in the ${BOOST_HEADER_DIR}/boost directory. Finally, you need ASIO header files. The easiest way for this set up is to use the ones included in the BIND 10 source tree. We assume you do it below. Once you install all dependencies and set BIND10_INSTALL_DIR, BIND10_SRC_DIR, and BOOST_HEADER_DIR, the following step should just work for building queryperf++: % ./configure --with-boost-include=${BOOST_HEADER_DIR} \ --with-bind10-include=${BIND10_SRC_DIR}/src/lib \ --with-bind10-lib=${BIND10_INSTALL_DIR} \ --with-asio-include=${BIND10_SRC_DIR}/ext/asio % make I have successfully built queryperf++ with several versions of g++ on FreeBSD and Linux, and with clang++ 3.1 on MacOS Lion. ******************** HOW TO USE queryperf++ ******************** If the build is completed successfully, you should be able to find an executable named queryperf++ in the src/bin/queryperfpp directory. There's a man page of the program in the directory. See the man for more details about how to use it. If you are interested in building your own measurement tool based on libqueryperf++, see the source code under the src/lib directory. All necessary source files are included in the tar ball, but if you want you can also clone the development repository on github: https://github.com/jinmei/queryperfpp ******************** FUTURE PLANS ******************** - TSIG support - Support for dynamic DNS update requests as test queries - Support for sending broken query data - TCP fallback support - Extend the library further so it can also run in the "stand alone" mode, i.e., without involving network I/O. We can then link it to the server source code (if it's reasonably modular) and measure the "gross" maximum performance. - Provide a Python wrapper interface, especially with the stand alone mode. We'll then be able to directly measure the gross performance of BIND 10 Python programs such as the xfrout daemon.