/MMM-Remote-Control

Magic Mirrror Module to shutdown or configure your mirror

Primary LanguageJavaScript

Magic Mirror Module: Remote Control

This module for the Magic Mirror² allows you to quickly shutdown your mirror through a web browser. The website should work fine on any device (desktop, smart phone, tablet, ...). Since we all want our SD cards to live a long and prosper life we properly shut down before pulling the power plug everytime, am I right? Additionally you can hide and show modules on your mirror.

The Main Menu The Power Menu Hide and Show a Module

Installation

  • (1) Clone this repository in your MagicMirror/modules folder:
git clone https://github.com/Jopyth/MMM-Remote-Control.git
  • (2) Add the module to your config/config.js file, if you add a position, it will display the URL to the remote on the mirror.
{
    module: 'MMM-Remote-Control'
    // uncomment the following line to show the URL of the remote control on the mirror
    // , position: 'bottom_left'
    // you can hide this module afterwards from the remote control itself
},
  • (3) Access the remote interface on http://192.168.xxx.xxx:8080/remote.html.

  • (4) If you are not running with sudo rights, the shutdown does not work (it should work for everyone who did not change anything on this matter).

Update

Update this module by navigating into its folder on the command line and executing this command: git pull.

Call methods from other modules

You can call any of the methods provided in the UI directly through a GET request, or a module notification. For example you can use MMM-ModuleScheduler to automatically shutdown your RasberryPi at a certain time, or integrate it with home automation systems.

Examples

  • Example for a GET request to trigger a RaspberryPi restart:
http://192.168.xxx.xxx:8080/remote?action=RESTART
  • Example for a notification schedule for MMM-ModuleScheduler to automatically switch your monitor on and off with :
notification_schedule: [
    {notification: 'REMOTE_ACTION', schedule: '30 9 * * *', payload: {action: 'MONITOROFF'}},
    {notification: 'REMOTE_ACTION', schedule: '30 18 * * *', payload: {action: 'MONITORON'}}
]
  • Example to trigger a RaspberryPi restart in your module:
this.sendNotification('REMOTE_ACTION', {action: 'RESTART'});

List of actions

action description
SHUTDOWN Shutdown your RaspberryPi
REBOOT Restart your RaspberryPi
RESTART Restart your MagicMirror
MONITORON Switch your display on
MONITOROFF Switch your display off
SAVE Save the current configuration (show and hide status of modules), will be applied after the mirror starts
HIDE Hide a module, with the identifier specified by module
SHOW Show a module, with the identifier specified by module

License

The MIT License (MIT)

Copyright © 2016 Joseph Bethge

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

The software is provided “as is”, without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. In no event shall the authors or copyright holders be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software.