A Python-based firmware upload tool for Winner Micro W600 & W601 WiFi Chips.
w600tool.py was started by vshymanskyy (@vshymanskyy).
- Automatically detects bootloader or helps entering
secboot - Get/Set MAC address
- Erase secboot and image
- Switch to high-speed mode
- Upload
fls,imgfiles
You will need either Python 2.7 or Python 3.4 or newer installed on your system.
The latest stable w600tool.py release can be installed from pypi via pip:
$ pip install w600tool
With some Python installations this may not work and you'll receive an error, try python -m pip install w600tool or pip2 install w600tool.
After installing, you will have w600tool.py installed into the default Python executables directory and you should be able to run it with the command w600tool.py.
usage: w600tool.py [-h] [-p PORT] [-b BAUD] [--get-mac] [--set-mac MAC] [-e]
[-u FILE]
[--upload-baud {115200,460800,921600,1000000,2000000}]
optional arguments:
-h, --help show this help message and exit
-p PORT, --port PORT
-b BAUD, --baud BAUD
--get-mac
--set-mac MAC
-e, --erase
-u FILE, --upload FILE
--upload-baud {115200,460800,921600,1000000,2000000}, default 2000000
$ w600tool.py -p COM5 -u W60X_MicroPython_1.10_B1.1_GZ.fls
Opening device: COM5
Erasing secboot
Switched speed to 2000000
Uploading W60X_MicroPython_1.10_B1.1_GZ.fls
0% [##############################] 100% | ETA: 00:00:00
Total time elapsed: 00:00:012
Reset board to run user code...