shawge/MSTeensyCANPropGPS

MegaSquirt MS3Pro sharing data with a Teensy3.2, Prop shield, Adafruit Ultimate GPS, and a TFT display over CAN bus

MSTeensyCANPropGPS

This project uses a Teensy 3.2 microcontroller to exchange data with a MegaSquirt MS3Pro engine controller over a CAN bus.

Hardware used

• Teensy 3.2 microcontroller
• Teensy Prop Shield connected via SPI and I2C.
  • 6-axis sensor, linear accelerometer and magnetometer
  • 3-axis angular rate gyroscope
  • Pressure/altitude and temperature
  • 2 watt audio amp
  • High speed 5V buffers for driving LEDs
  • 8MB flash
• Adafruit Ultimate GPS connected via serial
  • Version 3, 66 channel w/ 10Hz updates
• Waveshare CAN Transceiver connected via serial
• Color 320x240 TFT Touch Screen connected via SPI

Libraries used

• NXPMotionSense - motion sensors
• ILI9341_t3 - TFT
• XPT2046_Touchscreen - touch screen
• FlexCAN - CAN bus
• TinyGPSPlus - GPS
• FastLED - LED

Inspiration for this project is from

• openhoon/MSCan_Gauge
• merkur2k/MSCan_Gauge