- This is an ARM server-based OpenStack-Xena installation script.
- It is based on installing OpenStack on two servers, Controller Node and Compute Node.
- The OS of each node is ubuntu20.04.
- Configuration of Controller Node
cd OpenStack-Xena/controller-release
vi start.sh
>
...
# Inpute Value
H_NAMEv="controller" # hostname
SET_IPv="192.168.1.5" # controller IP
SET_IP2v="192.168.1.6" # compute IP
SET_IP_ALLOWv="192.168.0.0/22" # allow IP
INTERFACE_NAME_v="eth0" # interface
STACK_PASSWDv="stack" # passwd
...
- Start the OpenStack installation of the Controller Node
cd OpenStack-Xena/controller-release
source start.sh
- Interactive Input (step.1)
- Default is
[ENTER KEY]
, Passwd is {STACK_PASSWD}
- When
Is Compute Node installed?
occurs, stop input. (in Controller Node)
- Start the Openstack installation of Compute Node. (in Compute Node)
- Configuration of Compute Node
cd OpenStack-Xena/compute-release
vi start.sh
>
...
# Inpute Value
H_NAMEv="compute1" # hostname
SET_IPv="192.168.1.5" # controller IP
SET_IP2v="192.168.1.6" # compute IP
SET_IP_ALLOWv="192.168.0.0/22" # allow IP
INTERFACE_NAME_v="eth0" # interface
STACK_PASSWDv="stack" # passwd
...
- Start the OpenStack installation of the Compute Node
cd OpenStack-Xena/compute-release
source start.sh
- Interactive Input (step.2)
- Default is
[ENTER KEY]
- When
Are you going to install Neutron?
occurs, stop input. (in Compute Node)
- Restart the Openstack installation of Controller Node. (in Controller Node)
- Install OpenStack on Controller Node
- When Nova-Compute of Compute Node is installed, proceed with the following script.
- Check if the Compute Node is operating normally.
- Proceed with the rest of the script.
- Install OpenStack on Compute Node
- Proceed with the rest of the script.