/AA-SIPP-m

Algorithm for prioritized multi-agent path finding (MAPF) in grid-worlds. Moves into arbitrary directions are allowed (each agent is allowed to follow any-angle path on the grid). Timeline is continuous, i.e. action durations are not explicitly discretized into timesteps. Different agents' size and moving speed are supported. Planning is carried out in (x, y, \theta) configuration space, i.e. agents' orientation are taken into account.

Primary LanguageC++MIT LicenseMIT

AA-SIPP(m)

Description

AA-SIPP(m) is a path planning algorithm that builds collision-free trajectories for a set of agents in 2D environment represented as a grid. It's a prioritized planner, i.e. all agents are assigned unique priorities and paths are planned one by one in accordance with the imposed ordering using AA-SIPP (any-angle SIPP) algorithm. The latter builds on top of the SIPP planner, which is tailored to path finding for a single agent moving amidst static and dynamic obstacles (other agents in this case). One can opt to disable any-angle moves and plan for 2^k (k=1,2,3,4,5) moves only, i.e. k=2 - cardinal only moves, k=3 - cardinal and diagonal moves, etc.

Planning is carried out in (x, y, \theta) configuration space. Agents' headings, translating and rotating speeds, sizes are taken into account.

Agents are considered to be open disks of predefined radii. Radius of each agent can be specified and can be any positive real number, e.g. some agents can be bigger than the grid cells. They can be smaller as well. "Open disks" means that when the distance between the agent of radius r_1 and the agent of radius r_2 equals r_1 + r_2 no collision occurs, the distance has to be less than r_1 + r_2 for the collision to occur.

Agents' valid actions are (i) translate (ii) rotate in place (iii) wait in place. Moves' endpoints are tied to the centers of grid cells. Moves can be of arbitrary durations, i.e. the durations are not discretized into timesteps, e.g. duration of the translation action is moving speed (set by the user) times the length of the segment agent is traversing. Inertial effects are neglected so far, i.e. agents accelerate/decelerate instantaneously.

Example of the environment

Various techniques that enhance the performance of the prioritized planning are supported:

  • Start Safe Intervals (see link);
  • deterministic re-ordering in case of failure (following the heuristic rule described here);
  • random re-ordering in case of failure.

The MAPF instance to be solves (as well as algorithm's options) is supposed to be encoded in XML-file(s) of predefined structure (see "Input and Output files" or examples) and passed to the solver as command line argument(s). The result (paths and some additional information) is output to the (distinct) XML-file as well.

The implementation is self-contained. Code is written in C++ and is meant to be cross-platform. Implementation relies only on C+11 standard and STL. Open-source library to work with XML (tinyXML) is included at the source level (i.e. .h and .cpp files are part of the project).

Getting Started

To go and try this algorithm you can use QtCreator or CMake. Both .pro and CMakeLists files are available in the repository.

Notice, that project uses C++11 standart. Make sure that your compiler supports it.

These instructions will get you a copy of the project up and running on your local machine for development and testing purposes.

Prerequisites

Qt Creator — a cross-platform C++, JavaScript and QML integrated development environment which is part of the SDK for the Qt GUI Application development framework.

CMake — an open-source, cross-platform family of tools designed to build, test and package software.

Installing

Download current repository to your local machine. Use

git clone https://github.com/PathPlanning/AA-SIPP-m.git

or direct downloading.

Built current project using Qt Creator or CMake. To launch the compiled file you will need to pass input XML file as an argument. Output file for this project will be placed in the same folder as input file and, by default, will be named _log.xml. For examlpe, using CMake

cd PATH_TO_THE_PROJECT
cmake .
make

Input and Output files

Both files are an XML file with a specific structure.

Note that all tags in XML files are case sensitive.

Input file should contain:

  • Mandatory tag <agents>. It describes the task.

    • Optional tag <defaultparameters>. It is used to change the default values for size, speeds and headings of agents.

      • size — attribute that defines the radius of agents. Possible values [0, 10]. The value is relative to the grid's cell size, which always has conditional value 1. For example, 0.5 means that the agent size corresponds to the circle inscribed in the cell.
      • movespeed — attribute that defines the movement speed of agent. Possible values (0, 10]. The value is relative to the grid's cell size, which always has conditional value 1. For example, 1.0 means that the movement between two adjacent cells takes one time unit.
      • rotationspeed — attribute that defines how fast the agent can change its heading. Possible values (0, 10]. Speed 1.0 means that the agent can rotate for 180 degrees within one time unit. Other speeds are set as a coefficient to this ratio. This attribute makes sense only if option <planforturns> is active.
      • start.heading, goal.heading - attributes that defines the heading of agents. Possible values are [0, 360] degrees. Additional possible value for goal.heading is -1 or whatever which means that goal's heading doesn't matter. Zero degrees corresponds to the direction of increasing of coordinate X. The angle value increases counterclockwise. These attributes make sense only if option <planforturns> is active.

      If any of the parameters doesn't specified, the default value defined inside the code (in gl_const.h) is used. The default values are the following: size=0.5; movespeed=1.0; rotationspeed=1.0, start.heading=0; goal.heading=-1.

    • Mandatory tag <agent> defines start and goal locations, size and speeds of one agent.

      • id — attribute that defines the identicator for agent. It is used only for notifications and can have any value. In cases when ID doesn't specified the number in the order of enumeration is used.
      • start.x, start.y, goal.x, goal.y — mandatory attributes that defines the coordinates of start and goal locations. Legal values for start.x and goal.x are [0, .., width - 1], for start.y and goal.y - [0, .., height - 1]. (0,0) coordinates correspond to the upper left corner of the grid. Two agents can't have equal start or goal location and the distance between their start and goal locations must be not lower than the sum of their sizes. Moreover these locations must be traversable with respect to the sizes of the agents.
      • size, movespeed, rotationspeed, start.heading, goal.heading — additional attributes that allow to change the values of these attributes for an exact agent. The values specified here have a higher priority than the values specified in the default parameters.
  • Mandatory tag <map>. It describes the environment.

    • <grid> — mandatory tag that describes the square grid constituting the map.
    • height and width — mandatory attributes if tag <grid> that define size of the map. Origin is in the upper left corner. (0,0) - is upper left, (width - 1, height - 1) is lower right.
    • <row> — mandatory tags, each of which describes one line of the grid. Each row contains a sequence of "0" and "1" separated by blanks. "0" stands for traversable cell, "1" — for not traversable (actually any other figure but "0" can be used instead of "1"). Total number of "0" and "1" in each row must be equal to the width of the grid. Total number of rows must be equal to the height of the grid.
  • Mandatory tag <algorithm>. It describes the parameters of the algorithm. In cases when some tags, that describes the settings, are not specified or are incorrect the default values are taken.

    • <allowanyangle> — possible values true or false. Defines the choice between AA-SIPP and SIPP algorithms. By default the value is true.
    • <connectedness> — defines the connectedness of the grid. Possible values: 2(4 neighbors), 3(8 neighbors), 4(16 neighbors) and 5(32 neighbors). By default the value is 2.
    • <prioritization> — defines the initial prioitization of the agents. Possible values: fifo - priority of agents corresponds to the order of their enumeration in XML file; shortest_first - the less the distance between the start and goal locations, the higher the priority of the agent; longest_first - the more the distance between the start and goal locations, the higher the priority of the agent; random - shuffles the priorities of all agents in a random way. By default the value is fifo.
    • <rescheduling> — defines the possibility of using rescheduling in cases when the algorithm fails to find a solution. Possible values: none - rescheduling is disabled; rulebased - rises the priority of failed agent to the top; random - shuffles the priorities of all agents in a random way. By default the value is none.
    • <timelimit> — defines the amount of time that the algorithm can spend on finding a solution. Can be helpful in cases of using rescheduling. Possible values: -1 - no limit; n - number of seconds (n>0). By default the vaule is -1.
    • <startsafeinterval> — defines the size of additional constraints in the start locations of low-prioirity agents. Helps to find a solution for instances with many agents without rescheduling. Possible values: 0 - no startsafeintervals; n - the size of constraints, counts in conditional time units. By default the value is 0.
    • <planforturns> — defines the option of taking into account the headings of agents and the time required to change them. Possible values true or false. The cost of changing the heading is defined by the attributes rotationspeed that were described above. By default the value is false.
    • <waitbeforemove> — defines additional delay that each agent performs before starting to move along the next section. Possible values are [0;100]. By default the value is 0.
    • <inflatecollisionintervals> — this option increases the time between the moments when the agent and the dynamic obstacles (or high-priority agents) pass through the same areas of the space. Possible values are [0;100]. By default the value is 0.
  • Optional tag <options>. Options that are not related to search.

    • <loglevel> — defines the level of detalization of log-file. Default value is "1". Possible values:
      • "0" — log-file is not created.
      • "1" — log-file contains the names of input files, short <summary>, <path> and found trajectories inside tags <agent>. <summary> contains info of the path length, number of steps, elapsed time, etc. <path> tag looks like <grid> but cells forming the path are marked by "*" instead of "0". Each tag <agent> contains a path that consists of a sequence of sections with start and goal locations and duration.
      • "2" — instead of names of the input files all the input data is copied to the log-file plus the log-info that were made by loglevel="1".
    • <logpath> - defines the directory where the log-file should be written. If not specified directory of the input file is used.
    • <logname> - defines the name of log-file. If not specified the name of the log file is: "input file name" + "_log" + input file extension.
  • Optional tag <dynamicobstacles>. Contains the trajectories of dynamic obstacles.

    • Optional tag <defaultparameters>. It is used to change the default size value. Note that move speed and rotation speed can't be modified as their exact values already sewn inside duration attributes of the sections. The same can be said about the headings.
    • <obstacle> — contains the trajcetory of one dynamic obstacle represented as a seqence of sections. Can have its own size attribute.
      • <section> — describes a part of a trajectory. It must contain attributes start.x, start.y, goal.x, goal.y and duration.

Launch

To launch the application you need to have an input XML-file with all required information. If it's all-in-one file:

./AA-SIPP-m initial_file_name.xml

Due to simplify the procedure of performing experiments with many tasks, the parts of input XML-file can be devided into several files:

  • Task-file — contains part <agents>.
  • Map-file — contains part <map>.
  • Config-file — contains parts <algorithm> and <options>.
  • Obstacles-file — optional file, contains part <dynamicobstacles>.

The application can be launched with separated input files in the following way:

   ./AA-SIPP-m task_file_name.xml map_file_name.xml config_file_name.xml

or

   ./AA-SIPP-m task_file_name.xml map_file_name.xml config_file_name.xml obstacles_file_name.xml

If <loglevel> has value 1 or 2 the output file will be placed in the same folder as input file and, by default, will be named _log.xml. For examlpe,

"initial_file_name.xml" -> "initial_file_name_log.xml"

In case of using separate input files the output file by default will be named as the task-file, i.e. task_file_name_log.xml.

Repository folders

Videos folder contains a few video demonstrations of how AA-SIPP(m) works.

Instances folder contains an example of input and output files. It also contains the collections of instances that were used in corresponding conference papers for experimental evaluation.

Build Status