Flashing Arduino Due results in board not booting

Question

Flashing Arduino Due results in board not booting

sdroege opened this issue 5 years ago · 5 comments

Since ee5a651. The previous commit 2615437 still works (after applying fbca22d, without this flashing fails directly).

Flashing works fine in either case, but the board is not booting up and does not run any code apparently (LEDs etc are in default state).

Let me know if you need any further information or if I can help debugging this somehow.

Answer 1 · 2020-07-15T14:46:19.000Z

Related: platformio/platform-atmelsam/issues/78 zephyrproject-rtos/zephyr/pull/26866

Answer 2 · 2021-02-01T18:09:52.000Z

This issue seems to be fixed by either PR #111 or PR #151 for the 1.9 series of bossac

Answer 3 · 2022-02-11T06:36:58.000Z

Hi @sdroege ,
If you're using clone due have a look here

Answer 4 · 2023-01-11T22:01:06.000Z

@sdroege any update?

Answer 5 · 2023-10-18T20:03:31.000Z

@iddq I can confirm the issue still persists exactly as described on the newest version of BOSSA using an ATSAM3X8E on an Arduino due, just as @sdroege did.