/drv2605l-rs

Primary LanguageRustApache License 2.0Apache-2.0

drv2605l

This module implements a driver for the drv2605l, a Haptic Driver device addressable via I2C from Texas Instruments.

Its rather fully featured implementation for both LRA and ERM motors including:

  • Internal rom library sequencing and playback
  • Pwm playback at the in/trig pin
  • Real time playback over i2c commands
  • Analog voltage input at the in/trig pin

A few things are not supported at the time of this writing:

  • bidirectional input
  • choosing loop operation. The prefered and far more common closed loop operation is hardcoded except for the case of ERM rom libraries which require open loop.
  • audio to vibe mode
  • external trigger mode

This work originated in the drv2065 driver and may be able to unify someday.

License

Licensed under either of:

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.