Motivation

The original hddtemp is not maintained far too long. Due to that it was removed from the official repositories of Ubuntu (since 22.04) and Debian (since 12). This tool can be used instead to print the temps:

> sudo hddtemp-lt
/dev/sda    WDC WD10EFRX-68FYTN0       28
/dev/nvme0  Samsung SSD 950 PRO 256GB  40

Requirements

smartctl from smartmontools package
- NVMe support: smartctl v6.5+

Usage

hddtemp-lt [options] [disk1 ..]

Without any disk arguments, show temperature for all sd and nvme disks.

Options

-h, --help: Show usage
-q: Suppress warnings
-V, --version: Show version
--classic: Replicate output format of the original hddtemp
--classic-tcp: Replicate TCP daemon output format of the original hddtemp
--hint path: Provide a file containing smartctl --scan-open output as a hint for device types (-d option value for smartctl)
-u, --units C|F: Use Celsius (default) or Fahrenheit scale

Sometimes you could see NA (Not Available) printed instead of info about some disk. It could mean smartctl failed to auto-detect the connection type. In the case, first scan your devices (it is important to use --scan-open, not just --scan):

sudo smartctl --scan-open | tee smart-scan.txt

Next, feed it to the --hint option:

sudo hddtemp-lt --hint smart-scan.txt

Notice: It is important to keep the hint file in sync with connected disks.

By default, output is aligned into columns. Device models can contain spaces like WDC WD10EFRX-68FYTN0 or Samsung SSD 950 PRO 256GB so fields are separated by at least two spaces.

When --classic is applied:

output is not aligned, fields are separated by a colon followed by a space
scale marker is added

Sample classic output:

> sudo hddtemp-lt --classic
/dev/sda: WDC WD10EFRX-68FYTN0: 28°C
/dev/nvme0: Samsung SSD 950 PRO 256GB: 40°C

When --classic-tcp is applied:

output is not aligned, fields are pipe separated
there are no newlines
units marker is a separate field

Sample classic-tcp output:

> sudo hddtemp-lt --classic-tcp
|/dev/sda|WDC WD10EFRX-68FYTN0|28|C||/dev/nvme0|Samsung SSD 950 PRO 256GB|40|C|

Under systemd/ you can find basic systemd unit files to run a hddtemp-compatible tcp server on port 7634.

Notice: hddtemp-lt@.service assumes the tool is installed into /opt/hddtemp.

Installation

Fetch the archive either from releases or from the development branch, extract it and put hddtemp-lt under /usr/local/bin/. In case you downloaded the script alone from github by a raw link, be sure to manually make it executable.

How to provide smartctl output samples

No serial numbers, no time: