libmraa - Low Level Skeleton Library for Communication on GNU/Linux platforms

Libmraa is a C/C++ library with bindings to javascript & python to interface with the IO on Galileo, Edison & other platforms, with a structured and sane API where port names/numbering matches the board that you are on. Use of libmraa does not tie you to specific hardware with board detection done at runtime you can create portable code that will work across the supported platforms.

The intent is to make it easier for developers and sensor manufacturers to map their sensors & actuators on top of supported hardware and to allow control of low level communication protocol by high level languages & constructs.

Supported Boards

X86

ARM

USB

FT4222

Installing on your board

See the section below on compiling or use our repository to install on a glibc based yocto poky image that supports opkg. Adding this repository is as simple as and you'll have the latest stable tagged build of mraa installed!

echo "src mraa-upm http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586" > /etc/opkg/mraa-upm.conf
opkg update
opkg install mraa

If you would like to get the latest & greatest builds from master HEAD you can use our -dev repository

echo "src mraa-upm http://iotdk.intel.com/repos/3.0/intelgalactic-dev/opkg/i586" > /etc/opkg/mraa-upm.conf
opkg update
opkg install mraa

You can also install just the node.js mraa module by using npm. You will need a C++ compiler and the node development headers, however it's not required to have SWIG installed.

npm install mraa

Compiling

See documentation on building

Examples

See the examples available for various languages

Debugging

Sometimes it just doesn't want to work, let us try and help you, you can file issues in github or join us in #mraa on freenode IRC, hang around for a little while because we're not necessarily on 24/7, but we'll get back to you! Have a glance at our debugging page too.