indi_cam10_ccd
Making Indi driver for DIY Cam10 CMOS camera (Aptina/Micron MT9M001)
Original code was written in Delphi by Gilmanov Rim (Гильманов Рим). Ascom driver was written by Sergiy Vakulenko. Their code is shared on Sergiy Vakulenko's Github: https://github.com/vakulenko/CAM10_software
This port is based on the code of Gilles Le Maréchal (gehelem) - github
See:
- http://astroccd.org/category/cam10/
- http://www.astroclub.kiev.ua/forum/index.php?topic=28929.0
- http://indilib.org
- https://www.intra2net.com/en/developer/libftdi/documentation/
- http://www.fishcamp.com/pdf/mt9m001_1300_mono.pdf
Before starting:
sudo cp 99-cam10.rules /etc/udev/rules.d/
sudo service udev restart
To use it as stand alone application uncomment:
#define TESTING
Then run it:
./indi_cam10_ccd -p 155 -e 0.5
where -p is the hex value of the test pattern, -e exposure duration in seconds (min 0.1 max 1)
Andrei Prakapovich