simonsobs/sodetlib

Issues

• resonator_fitting: frequency spacing plotted wrong

  #445 opened 6 months ago by dpdutcher
  0

• Rfrac Values determined as Negative on SATP3 Mv35 (So4

  #443 opened 6 months ago by samdayweiss
  1

• Psat not calculated in most robust way from IV curves

  #393 opened 6 months ago by dpdutcher
  1

• Need a way to bookkeep fixed_tones and keep them on

  #430 opened 9 months ago by msilvafe
  7

• Smurf S04 Slot 2 high noise on Bands 0-3, 'Unlocked' Jesd status

  #439 opened 7 months ago by samdayweiss
  2

• Add sodetlib version to get_metadata

  #436 opened 8 months ago by kmharrington
  1

• Relock Analysis Showing Large df p2p values while readout noise looks normal

  #433 opened 8 months ago by samdayweiss
  6

• IV curves break on UHF detectors

  #434 opened 8 months ago by dpdutcher
  0

• complex impedance crashes on dict_to_am because cryocard fw is tuple

  #428 opened 8 months ago by dpdutcher
  0

• Fix responsivity in iv

  #416 opened a year ago by satoru99
  3

• Make Hammer Default to dump logs

  #422 opened a year ago by msilvafe
  0

• uxm_relock does not use tone_power info in dev_cfg

  #414 opened a year ago by msilvafe
  2

• Bias step rebiasing tagged incorrectly

  #397 opened a year ago by kmharrington
  2

• `take_bias_steps` fails and hits UnboundLocalError

  #395 opened a year ago by BrianJKoopman
  1

• overbias_det causing overheating problem on MXC

  #394 opened a year ago by yaqiongl
  3

• Disable compression during bias steps

  #375 opened 2 years ago by jlashner
  1

• pysmurf issue of epics failed to respond

  #368 opened 2 years ago by yaqiongl
  1

• Fix plotting functions in squid curves modules

  #367 opened 2 years ago by jlashner
  0

• Issue when running uxm_setup on slot 5

  #287 opened 2 years ago by karenperezsarmiento
  0

• Add warm 300K amplifiers to setup_amps?

  #292 opened 2 years ago by kmharrington
  1

• Not enough time after loading defaults before trying to query SmurfVersion

  #355 opened 2 years ago by samdayweiss
  1

• Remove `modify_attens` from setup_phase_delay

  #351 opened 2 years ago by jlashner
  0

• Rfracs from bias steps should be plotted and saved after taking bias steps

  #343 opened 2 years ago by jlashner
  2

• Amplifier Biases not set properly with `apply_dev_configs` arg in `get_smurf_control`

  #342 opened 2 years ago by msilvafe
  1

• overbias wait missing?

  #333 opened 2 years ago by csierra2
  0

• Add show_plot kwarg to setup_phase_delay

  #332 opened 2 years ago by jlashner
  0

• Current monitor doesn't work when using smurf-streamer

  #302 opened 2 years ago by jlashner
  0

• Recognizing fixed tones in archival data

  #304 opened 2 years ago by jlashner
  8

• Have uxm_relock run take_noise even if tracking is bad

  #293 opened 2 years ago by kmharrington
  1

• Change default behavior for setup_amps.

  #291 opened 2 years ago by kmharrington
  3

• active_bands and active_bgs

  #305 opened 2 years ago by jlashner
  1

• parallelize pysmurf setup step of jackhammer

  #306 opened 2 years ago by jlashner
  1

• add in bg bias voltage in this plot

  #329 opened 2 years ago by yuhanwyhan
  0

• server connection loss during consecutive bias steps

  #328 opened 2 years ago by csierra2
  2

• Add functions to take bias steps / noise vs bias

  #327 opened 2 years ago by jlashner
  0

• Wishlist of having bias_step time constant measurement analysis to be optional

  #326 opened 2 years ago by yuhanwyhan
  0

• mismatching attribute name in plot_Rfrac

  #325 opened 2 years ago by yuhanwyhan
  2

• jackhammer --soft should not run S.setup()

  #313 opened 2 years ago by dpdutcher
  0

• take_bias_steps fails with AttributeError: 'BiasStepAnalysis' object has no attribute 'R_n'

  #324 opened 2 years ago by dpdutcher
  1

• Outlier frac_pp

  #318 opened 2 years ago by msilvafe
  0

• Multiple resonators on a Tune file have the exact same complex 21 array ('resp_eta_scan' in the tunefiles)

  #300 opened 2 years ago by chw3k5
  1

• Save tune_ucs and tune_dcs separately

  #310 opened 2 years ago by jlashner
  0

• sodetlib operations need to have "oper,subtype" tags for their streaming functions

  #309 opened 2 years ago by kmharrington
  0

• Save bias ranges for bias_dets_to_rfrac_range in cfg

  #307 opened 2 years ago by jlashner
  0

• Add labels to top of rogue gui windows

  #303 opened 2 years ago by jlashner
  0

• Add QC Module

  #301 opened 2 years ago by msilvafe
  1

• Add median bias levels into the noise data saved by take noise?

  #294 opened 3 years ago by kmharrington
  3

• bias step analysis fails if not all bias groups have data

  #297 opened 3 years ago by dpdutcher
  0

• Make cfg.get_smurf_control(... apply_dev_configs=True) work for the C05 cryocards.

  #290 opened 3 years ago by kmharrington
  1

• Better Attenuation Determination

  #288 opened 3 years ago by jlashner
  0