This is the Klipper configuration for my Voron V2.4, V2-2566.
It uses my common macros too, which are shared with Workbench, my Voron V0.
Feel free to use anything you find here, but remember, if it breaks, you get to keep the pieces.
Here are links to some add-ons and mods (not exhaustive) that I use on my printers:
- Voron TAP: https://github.com/VoronDesign/Voron-Tap
- KAMP (Klipper Adaptive Meshing and Purging): https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging
- Kiauh: https://github.com/th33xitus/kiauh
- Enclosure Lighting: https://www.thingiverse.com/thing:4933314
- Moonraker-Telegram: https://github.com/Raabi91/moonraker-telegram
- KlipperScreen: https://klipperscreen.readthedocs.io/en/latest/
- LED Effect: https://github.com/julianschill/klipper-led_effect
- Filament Latches: https://github.com/richardjm/voron-parts/tree/main/voron-2.4/FilamentLatch
- Piezoelectric speaker how-to (for M300): https://www.reddit.com/r/klippers/comments/qmwfw0/how_to_attach_a_buzzerbeeper_skr_14_pi3b_5/
- Pressure Advance Calibration macro: https://github.com/ksanislo/klipper-pa_cal
Here are some mods that I was using but have since deprecated:
- Klicky Probe: https://github.com/jlas1/Klicky-Probe
- Auto-Z: https://github.com/protoloft/klipper_z_calibration