sinara-hw/Zotino

Issues

• unreliable startup of alternate DC/DC

  #37 opened a year ago by sbourdeauducq
  7

• HD68 Cables

  #34 opened a year ago by andrewvh4
  1

• v1.4.2 changelog

  #36 opened a year ago by filipswit
  0

• v1.4.1 changelog

  #33 opened a year ago by filipswit
  1

• v1.4 changelog

  #31 opened a year ago by gkasprow
  0

• L1 and J2 collision

  #35 opened 2 years ago by pkozakiewicz
  1

• parts availability

  #32 opened 2 years ago by gkasprow
  1

• DAC_OUT_N32 is not declared

  #29 opened 3 years ago by marmeladapk
  1

• R4

  #30 opened 3 years ago by gkasprow
  0

• connect SMPS shield to GND at the module input

  #28 opened 3 years ago by gkasprow
  1

• add TVS to EEM I2C

  #26 opened 3 years ago by gkasprow
  1

• Missing: IDC Connector Specs/Pitch

  #24 opened 3 years ago by drewrisinger
  6

• Temperature IDC should be 10-pin

  #23 opened 3 years ago by hartytp
  5

• support for CPCIS

  #19 opened 3 years ago by gkasprow
  1

• DAC death

  #2 opened 7 years ago by sbourdeauducq
  166

• Zotino v1.1 testing:

  #21 opened 6 years ago by hartytp
  50

• Noise measurement; unexpected 2 MHz bump

  #27 opened 5 years ago by jordens
  1

• Power cycling problem

  #20 opened 5 years ago by krmac
  11

• v1.1 testing

  #1 opened 5 years ago by hartytp
  1

• Zotino v1.1 errata

  #22 opened 6 years ago by hartytp
  18

• v1.3 review

  #18 opened 7 years ago by gkasprow
  9

• screening clips

  #17 opened 7 years ago by hartytp
  3

• v1.2 incomplete IDC connector soldering

  #3 opened 7 years ago by jordens
  3

• Switch DAC package

  #5 opened 7 years ago by hartytp
  6

• v1.2 heatsink glue softens when warm

  #4 opened 7 years ago by sbourdeauducq
  2

• heatsink too high

  #16 opened 7 years ago by gkasprow
  4

• jack screws

  #8 opened 7 years ago by hartytp
  4

• SMPS output capacitors

  #11 opened 7 years ago by hartytp
  0

• SMPS power rating

  #12 opened 7 years ago by hartytp
  1

• LDO reverse voltage diode

  #6 opened 7 years ago by hartytp
  10

• SMPS voltage incorrect

  #10 opened 7 years ago by hartytp
  4

• Connect EPAD to -12V

  #14 opened 7 years ago by hartytp
  0

• ground front panel

  #15 opened 7 years ago by gkasprow
  0

• Replace negative LDO

  #9 opened 7 years ago by hartytp
  1

• SMPS over current

  #13 opened 7 years ago by hartytp
  6

• Zotino rev1.1 issue

  #7 opened 7 years ago by prasath-d
  2