sipeed/TangNano-9K-example

Issues

• spi_lcd 中的 `ifdef MODELTECH 似乎是错的

  #27 opened 2 months ago by YesSanSan
  0

• 希望出一个高云FPGA的HDMI欺骗器例程

  #26 opened 2 months ago by aldfaaa
  0

• Sipeed license server for Gowin IDE is offline again

  #25 opened 3 months ago by MaxwelL0v0
  0

• Best Way to Debug?

  #24 opened 4 months ago by willlogs
  0

• How to use with Mac?

  #23 opened 5 months ago by louis030195
  2

• problem compiling provided .c files

  #18 opened 6 months ago by gustavosousa2208
  3

• [picotiny] Flashing got stuck at `Flashing 1/3`.

  #14 opened 2 years ago by hfwang132
  1

• Picotiny example fails during Place & Route

  #19 opened 9 months ago by Slamy
  5

• Half of examples no work

  #21 opened 7 months ago by freetoair
  4

• Provide TangNano 9k board information for icestudio

  #20 opened 8 months ago by tmssngr
  0

• Issues about using GAO

  #17 opened a year ago by cyhcyhgo
  1

• Hdmi example with pll and dvi tx

  #15 opened a year ago by nobotro
  0

• picotiny shows only testscreen

  #11 opened 2 years ago by jux1e
  4

• picotiny example doesn't show up via HDMI capture

  #6 opened 2 years ago by jeremyherbert
  6

• Examply picotiny project doesn't place/route

  #13 opened 2 years ago by richardklingler
  2

• What are the pin numbers for the two buttons on Tang Nano 9K?

  #12 opened 2 years ago by juj
  1

• Anyone got pong to work?

  #10 opened 2 years ago by rickbronson
  0

• 404 Page not found (link to led demo in README.md)

  #8 opened 2 years ago by Andy2No
  2

• BL702 UART firmware update on Tang Nano 9k

  #7 opened 2 years ago by charkster
  1

• Can't flash firmware

  #1 opened 2 years ago by splinedrive
  2

• Failed to build the project on a Raspberry Pi 3b+ running Debian 11 aarch64

  #4 opened 2 years ago by kyonmiriam
  1

• HDMI Example ?

  #3 opened 2 years ago by Martoni
  1