skiselev/omega

Issues

• Bizarre signals with no video out

  #53 opened 5 months ago by ProfsRetroFix
  1

• Keyboard v1.1 ghosting

  #54 opened 3 months ago by zomgugoff
  0

• Simple floppy disk controller

  #5 opened 5 years ago by Wierzbowsky
  16

• Way better s-video picture quality than rgb

  #52 opened 10 months ago by Sch-LikA
  2

• Floppy disk interface TDC-600 clone Error.

  #49 opened 2 years ago by drawingangnam
  12

• Make Ys available on the RGB connector

  #39 opened 3 years ago by sdsnatcher
  3

• Some small suggestions for improvement

  #1 opened 5 years ago by sdsnatcher
  9

• Any reason for JP7 and RR10 to exist?

  #41 opened 2 years ago by sdsnatcher
  3

• Position C93 must be jumped if the optional PAL clock generator is not installed

  #40 opened 2 years ago by sdsnatcher
  2

• Put Luma instead of CVBS on the pin-4 of the RGB connector

  #38 opened 3 years ago by sdsnatcher
  1

• ROM content

  #31 opened 2 years ago by alex3331
  17

• Possibility of adding a numeric keypad?

  #44 opened 2 years ago by nullvalue0
  1

• Omega Keyboard is missing two keys to be JIS layout.

  #46 opened 2 years ago by dude22072
  1

• Could use some help debugging my cartridge slots..

  #48 opened 2 years ago by nullvalue0
  1

• Proposed box of various designs for MSX Omega

  #43 opened 2 years ago by Mundo-Desconocido
  7

• Keyboard LEDs

  #47 opened 2 years ago by peterw8102
  2

• spacebar stabilizer part no is wrong

  #45 opened 2 years ago by mrkite
  4

• Hardware switch & HDMI

  #35 opened 2 years ago by EMLommers
  3

• Is there a way to run 128 K or larger rom files on Omega

  #36 opened 2 years ago by alex3331
  3

• Is switch 53 illuminated

  #32 opened 2 years ago by alex3331
  5

• No video

  #34 opened 2 years ago by alex3331
  13

• Ja esta 100%?

  #33 opened 2 years ago by darleiv
  1

• Which Programmer to buy?

  #42 opened 2 years ago by CaffeinatedTech
  2

• HC vs HCT - BOM / Silkscreen mistmatch

  #37 opened 3 years ago by rain2usa
  3

• Suggestion: Turbo support

  #2 opened 5 years ago by sdsnatcher
  2

• Power supply issues

  #24 opened 3 years ago by merlinkv
  5

• Fujitsu memory MB81416-12

  #30 opened 3 years ago by alex3331
  1

• source of V9958

  #25 opened 3 years ago by alex3331
  1

• Diode D1 is a resistor on the Mainboard Bill of Materials

  #29 opened 3 years ago by ironardin
  1

• PCB Boards

  #26 opened 3 years ago by alex3331
  1

• HC vs HCT vs AHCT

  #27 opened 3 years ago by alex3331
  3

• What size are the PCB?

  #28 opened 3 years ago by ironardin
  1

• Key caps

  #23 opened 3 years ago by alex3331
  2

• Rerouting Damaged Traces (and JP7) on v1.2 Mainboard

  #22 opened 3 years ago by TankedThomas
  4

• Carnivore2 multifunction card support

  #18 opened 4 years ago by Sch-LikA
  4

• Minor suggestion - Mouser BOM no longer accurate

  #14 opened 3 years ago by billlagr
  3

• About C68,C69 and C70

  #21 opened 4 years ago by Bobitsme
  1

• After I assembled the Omega MSX2, I found that the image kept flickering.

  #19 opened 4 years ago by denjhang
  3

• Does Omega support MSX-AUDIO (Y8950)?

  #17 opened 4 years ago by denjhang
  2

• LS vs HCT

  #20 opened 4 years ago by NuClear235
  1

• Cartridges over 16K

  #15 opened 4 years ago by JmanNZ
  0

• Safe substitution of 74AHCT with 74LS logic devices?

  #16 opened 4 years ago by elosha
  1

• Possible MSX2+ upgrade option

  #6 opened 5 years ago by Wierzbowsky
  12

• Optional FM-PAC

  #4 opened 5 years ago by Wierzbowsky
  1

• Installing different video chips

  #3 opened 5 years ago by Wierzbowsky
  2

• Stop button location and size

  #7 opened 5 years ago by Wierzbowsky
  2