skot/bitaxe

Issues

• Request: BOM file for different suppliers e.g. jlcpcb

  #127 opened 10 months ago
  3

• Where do i find the centroid file?

  #126 opened 10 months ago
  1

• Ask for help

  #125 opened 10 months ago
  3

• Fan PWM speed control should be pulled up to 5V instead of 3.3V

  #124 opened 7 months ago
  4

• Add additional mounting holes

  #121 opened 10 months ago
  1

• Remove display header in favor of staggered holes

  #120 opened a year ago
  7

• Bitaxe 1366 Severely Underhashing

  #118 opened a year ago
  27

• Button footprint too small

  #113 opened a year ago
  4

• Wrong Noctua Fan Link in readme.md

  #111 opened a year ago
  1

• Wi-Fi password is stored in plain text.

  #105 opened a year ago
  0

• Bitaxe endless loop

  #104 opened a year ago
  3

• Incorrect input cap' (C22)

  #97 opened a year ago
  1

• Incorrect input cap' (C23)

  #96 opened a year ago
  1

• TPS40305 PGOOD signal is incorrectly pulled up to BP

  #95 opened a year ago
  4

• Bitaxe not connecting

  #94 opened a year ago
  1

• ninja failed with exit code 1. Halp, I'm dead in the water when attempting to Flash my axe

  #93 opened a year ago
  2

• Mode Pins on BM1366

  #89 opened a year ago
  4

• Fix U9 footprint

  #88 opened a year ago
  7

• VDDIO pins are internally connected

  #87 opened 10 months ago
  0

• add symbol libraries to project

  #83 opened a year ago
  1

• Add barrel polarity to silkscreen

  #82 opened a year ago
  1

• BOM: R16 value mismatches value of related component

  #80 opened a year ago
  1

• Centroid file ("Pick & place" file)

  #76 opened a year ago
  3

• Fan and heatsink specification

  #75 opened a year ago
  7

• Add missing libraries to kicad project

  #72 opened a year ago
  1

• add room on PCB for rubber feet

  #70 opened a year ago
  1

• make the heatsink clip holes a bit smaller.

  #69 opened a year ago
  1

• Remove unused traces - R7, R8 and R17

  #68 opened a year ago
  1

• Add support for 1.47" color display

  #67 opened 8 months ago
  1

• Fiducial marks

  #66 opened a year ago
  1

• Replace power connection with 2.1ID 5.5OD barrel connector

  #65 opened a year ago
  2

• Change micro usb USB connector to USB-C

  #64 opened a year ago
  3

• Replace 1.8V LDO U5 with 1.2V MCP1824T-1202E

  #63 opened 7 months ago
  10

• Add copper layer ASIC alignment markers

  #62 opened a year ago
  4

• Add a PCB air temp sensor.

  #61 opened a year ago
  1

• BI pin floating

  #60 opened a year ago
  0

• ASIC chip temp not working

  #59 opened a year ago
  6

• Fan speed control is inverted

  #58 opened a year ago
  2

• Add USB connector

  #56 opened a year ago
  4

• ESP32-C6

  #55 opened a year ago
  16

• VDD bypass pins need another layer of caps

  #54 opened a year ago
  1

• C21 silkscreen missing

  #53 opened a year ago
  3

• Collection for ESP coder

  #51 opened a year ago
  2

• Sponsor

  #50 opened a year ago
  0

• Noob Question

  #47 opened a year ago
  1

• Barrel to wire screw terminal adapter is no good for powering the bitaxe

  #46 opened a year ago
  3

• TXB0104 does not like the 1K NRSTI pulldown R1

  #42 opened a year ago
  4

• Error loading symbol library BM1397

  #39 opened 2 years ago
  1

• TXB0104 level shifter oscillates when connected to external usbserial adapter

  #35 opened a year ago
  0

• 3V3 debug header silkscreen labels are from the MCU perspective

  #34 opened a year ago
  2