Very Cube Internet Radio
英文
Flashing Steps: Hold the Boot Key and power on: Ensure your ESP32-S2 board enters flashing mode.
Select USB Port: After opening the webpage, choose the correct USB port.
Select files and corresponding addresses:
Bootloader file: File: CudeRadioPlaylist.ino.bootloader.bin Address: 0x1000
Partition file: File: CudeRadioPlaylist.ino.partitions.bin Address: 0x8000
Leave blank: Address: 0xE000
Main application file: File: CudeRadioPlaylist.ino.bin Address: 0x10000
Click upload: Once all files are correctly selected, click upload and wait for the flashing to complete.
——————————————————————————————————
中文
按Boot Key 上电开机， 选USB port
根据以下来选file
bootloader 文件： CudeRadioPlaylist.ino.bootloader.bin 地址： 0x1000
分区文件： CudeRadioPlaylist.ino.partitions.bin 地址： 0x8000
放空 地址： 0xE000
主应用程序文件： CudeRadioPlaylist.ino.bin 地址： 0x10000