/ac-remote

Primary LanguageC

AC-remote

Project moved to esp-open-rtos

TODO

  • Make the final decission on what framework I want to use (original espressif sdk or SuperHouse)
  • Serve configuration page on HTTP

About

Small project for home automation. Main goal: a client device that accepts air condition modes on Serial port and sends them through IR.

Command structure:

mode,fan,temperature,state;

  • mode - one of the available modes: cooling / dehumidification / auto / heating
  • fan - fan speed
  • temperature
  • state - on / off

It's a work in progress project

esp-open-rtos aws-iot readme

Please follow the steps below to build and run the example on your ESP8266.

  1. Modify client_config.c to provide your own account-specific AWS IoT endpoint, ECC-based client certificate, and private key.

Your endpoint is in the form of <prefix>.iot.<region>.amazonaws.com. It can be retrieved using the following command:

$ aws iot describe-endpoint

Your ECC-based certificate and private key can be generated by using the following commands:

$ openssl ecparam -out ecckey.key -name prime256v1 -genkey
$ openssl req -new -sha256 -key ecckey.key -nodes -out eccCsr.csr
$ aws iot create-certificate-from-csr --certificate-signing-request file://eccCsr.csr --certificate-pem-outfile eccCert.crt --set-as-active

To convert the certificate or key file into C string, you could try the following example:

$ cat ecckey.key | sed -e 's/^/"/g' | sed -e 's/$/\\r\\n"/g'

Note, more information about using ECC-based certificate with AWS IoT can be found in the following blog

https://aws.amazon.com/blogs/iot/elliptic-curve-cryptography-and-forward-secrecy-support-in-aws-iot-3/

  1. Create and attach AWS IoT access policy to the certificate
$ aws iot create-policy --policy-name test-thing-policy --policy-document '{ "Version": "2012-10-17", "Statement": [{"Action": ["iot:*"], "Resource": ["*"], "Effect": "Allow" }] }'
$ aws iot attach-principal-policy --policy-name test-thing-policy --principal "arn:aws:iot:eu-west-1:892804553548:cert/2d9c2da32a95b5e95a277c3b8f7af40869727f5259dc2e907fc8aba916c857e"

Note, the 'principal' argument is the certificate ARN generated from the pervious command 'aws iot create-certificate-from-csr'.

  1. Modify include/ssid_config.h with your Wifi access Id and credential.

  2. Build and flash the example firmware to the device using the command below:

$ make flash -C examples/aws_iot ESPPORT=/dev/ttyUSB0

Note, it assumes your ESP8266 is connected through USB and exposed under your Linux host as /dev/ttyUSB0.

  1. Once the ESP8266 is connected to AWS IoT, you can use the MQTT client on the AWS IoT console to receive the messages published by the ESP8266 to topic 'esp8266/status'. You could also publish 'on' or 'off' message to topic 'esp8266/control' to toggle the GPIO/LED (GPIO2 is used by the example).