slaxor/the-bus-pirate

Issues

• Update to SPI script in pyBusPirateLite

  #73 opened 9 years ago by GoogleCodeExporter
  2

• Update to SPI script in pyBusPirateLite

  #74 opened 9 years ago by GoogleCodeExporter
  1

• SPISniffer output is not flushed

  #70 opened 9 years ago by GoogleCodeExporter
  0

• V4 SPI_sniffer: wrong (1) and skipping every second read (or wrong reads) when using (2) macro

  #71 opened 9 years ago by GoogleCodeExporter
  0

• Incorrect SPI1CON1 prescaler values for SPI binary mode with freq >= 2.6MHz

  #72 opened 9 years ago by GoogleCodeExporter
  0

• Fix tab/space consistency in python

  #67 opened 9 years ago by GoogleCodeExporter
  0

• BitBang.py bug/typo on line 125/126

  #68 opened 9 years ago by GoogleCodeExporter
  2

• automatic switch to bootloader through pirate-loader

  #69 opened 9 years ago by GoogleCodeExporter
  0

• bpxsvfplayer utility has a major bug in serial initialization

  #64 opened 9 years ago by GoogleCodeExporter
  1

• Binary Mode misbehaves after receiving 20 zeroes at once

  #65 opened 9 years ago by GoogleCodeExporter
  0

• SPI Mode: MOSI HiZ doesn't work

  #66 opened 9 years ago by GoogleCodeExporter
  0

• Patch for /trunk/source/procMenu.c

  #62 opened 9 years ago by GoogleCodeExporter
  2

• pyBusPirate rawwire mode: a few commands broken

  #63 opened 9 years ago by GoogleCodeExporter
  0

• spi test script doesn't work

  #61 opened 9 years ago by GoogleCodeExporter
  1

• environment should be python2 not python

  #60 opened 9 years ago by GoogleCodeExporter
  0

• Allow to reset from bootloader

  #58 opened 9 years ago by GoogleCodeExporter
  3

• OpenOCD disabled

  #59 opened 9 years ago by GoogleCodeExporter
  0

• Patch to always have correct value of MAXPROTO

  #56 opened 9 years ago by GoogleCodeExporter
  2

• Annoyances in firmware archives

  #57 opened 9 years ago by GoogleCodeExporter
  0

• Patch to compile on Linux

  #55 opened 9 years ago by GoogleCodeExporter
  10

• Support in SPI for CS (low-high enable) vs. CS# (high-low enable)

  #53 opened 9 years ago by GoogleCodeExporter
  1

• basic interpreter fails to properly store entered code past line 1535

  #54 opened 9 years ago by GoogleCodeExporter
  1

• Supplies power locks 'on' after SPI writes, mode switch

  #52 opened 9 years ago by GoogleCodeExporter
  3

• add the 4096 bytes ring-buffer also on binary modes

  #51 opened 9 years ago by GoogleCodeExporter
  1

• BP gets locked in bit-bang mode.

  #50 opened 9 years ago by GoogleCodeExporter
  4

• Make the I2C address for character LCD adapter configurable

  #48 opened 9 years ago by GoogleCodeExporter
  1

• PirateRename doean't work on PPC macs

  #49 opened 9 years ago by GoogleCodeExporter
  0

• parameter name mismatch

  #47 opened 9 years ago by GoogleCodeExporter
  0

• UART Live mode fix

  #46 opened 9 years ago by GoogleCodeExporter
  2

• Add stepper control

  #45 opened 9 years ago by GoogleCodeExporter
  0

• Add servo control

  #44 opened 9 years ago by GoogleCodeExporter
  1

• Protocol: Nrf2401(RF-24G)

  #42 opened 9 years ago by GoogleCodeExporter
  2

• user interface (keypad/dispay)

  #43 opened 9 years ago by GoogleCodeExporter
  1

• python library for the Bus Pirate

  #40 opened 9 years ago by GoogleCodeExporter
  5

• Binary UART access mode

  #41 opened 9 years ago by GoogleCodeExporter
  1

• Use global struct for data storage

  #39 opened 9 years ago by GoogleCodeExporter
  2

• 0Tis Elevat0r C0mpany R3mote Stati0n Pr0tocol

  #37 opened 9 years ago by GoogleCodeExporter
  2

• UART bridge mode

  #38 opened 9 years ago by GoogleCodeExporter
  1

• JTAG Probe Chain Macro Only Finds First Device

  #36 opened 9 years ago by GoogleCodeExporter
  4

• I2C check for bus contention, timeout, clock streatching?

  #35 opened 9 years ago by GoogleCodeExporter
  2

• Automatic Baud Detection on Transparent UART Bridge Mode

  #32 opened 9 years ago by GoogleCodeExporter
  6

• Add clock sample and phase options to bitbang library

  #33 opened 9 years ago by GoogleCodeExporter
  1

• I2C slave mode in hardware library

  #34 opened 9 years ago by GoogleCodeExporter
  0

• 1-Wire new device codes

  #31 opened 9 years ago by GoogleCodeExporter
  2

• Self test to verify pins and connections

  #30 opened 9 years ago by GoogleCodeExporter
  2

• Bootloader turns on LED

  #29 opened 9 years ago by GoogleCodeExporter
  2

• Program SPI/I2C EEPROMs from file

  #28 opened 9 years ago by GoogleCodeExporter
  1

• Support for large binary numbers

  #27 opened 9 years ago by GoogleCodeExporter
  1

• Support for large binary numbers

  #26 opened 9 years ago by GoogleCodeExporter
  0

• LCD terminal mode

  #25 opened 9 years ago by GoogleCodeExporter
  1