- Open Terminal and run the following:
mkdir homebrew && curl -L https://github.com/Homebrew/brew/tarball/master | tar xz --strip 1 -C homebrew
- From Terminal, run the following (from https://github.com/wingsuitist/brewamp/blob/master/src/dnsmasq.sh):
if (brew services list|grep dnsmasq); then
tell "DNS Masq guids us to the right IP which is 127.0.0.1 - but it's already here"
else
tell "DNS Masq guids us to the right IP which is 127.0.0.1 - so lets summon this last deamon"
brew install -v dnsmasq
echo 'address=/.dev/127.0.0.1' > $(brew --prefix)/etc/dnsmasq.conf
echo 'listen-address=127.0.0.1' >> $(brew --prefix)/etc/dnsmasq.conf
echo 'port=35353' >> $(brew --prefix)/etc/dnsmasq.conf
brew services start dnsmasq
fi
if [ -e /etc/resolver/dev ]; then
tell "DNS Masq is already in our resolver list"
else
tell "So let's call DNS Masq all the time - cause, yes - it's nice"
sudo mkdir -v /etc/resolver
sudo bash -c 'echo "nameserver 127.0.0.1" > /etc/resolver/dev'
sudo bash -c 'echo "port 35353" >> /etc/resolver/dev'
fi
from https://gist.github.com/jed/6147872
-
Open Terminal and cd into the root folder of your project.
-
Create a temporary configuration file:
cat > openssl.cnf <<-EOF
[req]
distinguished_name = req_distinguished_name
x509_extensions = v3_req
prompt = no
[req_distinguished_name]
CN = *.${PWD##*/}.dev
[v3_req]
keyUsage = keyEncipherment, dataEncipherment
extendedKeyUsage = serverAuth
subjectAltName = @alt_names
[alt_names]
DNS.1 = *.${PWD##*/}.dev
DNS.2 = ${PWD##*/}.dev
EOF
- Create the certificate:
openssl req \
-new \
-newkey rsa:2048 \
-sha256 \
-days 3650 \
-nodes \
-x509 \
-keyout ssl.key \
-out ssl.crt \
-config openssl.cnf
- if you get the error "unable to write to random state", do
sudo rm ~/.rnd
and create the certificate again.
- Remove the configuration file:
rm openssl.cnf
- Open the SSL certificate in your keychain:
open /Applications/Utilities/Keychain\ Access.app ssl.crt
-
Select the newly imported certificate, which should appear at the bottom of the certificate list, right click, and select "Get Info".
-
In the popup window, click the ▶ button to the left of Trust, and select Always Trust for When using this certificate:.
-
Close the popup window.
-
When prompted, enter your password again and click Update Settings.
-
Close Keychain Access.