smit-happens/YCP_EVOS

Issues

• Gas Pedal Tolerance

  #130 opened 7 years ago by YoungMaker
  4

• Display Metrics on GLCD

  #119 opened 7 years ago by smit-happens
  1

• Handle possible buffer overflows

  #156 opened 7 years ago by smit-happens
  1

• Brake light flickers when brake is at zero

  #165 opened 7 years ago by smit-happens
  0

• GLCD doesn't show anything on the screen

  #179 opened 7 years ago by smit-happens
  1

• Modify OrionModel and OrionController to use the pack summed voltage

  #178 opened 7 years ago by ShawnPierpont
  1

• Brake and Accelerator Pressed Simultaneously

  #106 opened 7 years ago by atokosch
  2

• pedal values aren't being sent to the MC

  #173 opened 7 years ago by smit-happens
  1

• Handle reading from the RTC

  #176 opened 7 years ago by smit-happens
  0

• Battery % Bar goes past the end of the screen and wraps around

  #169 opened 7 years ago by YoungMaker
  1

• Energized doesn't get fully cleared off the screen

  #172 opened 7 years ago by YoungMaker
  1

• Poll the Unitek for MC and Motor temperatures

  #174 opened 7 years ago by ShawnPierpont
  0

• implement function to set RGB backlight of the display

  #161 opened 7 years ago by smit-happens
  0

• Early log message crashes serial logger.

  #160 opened 7 years ago by smit-happens
  1

• Check datatypes to verify they are not the cause of the motor going in reverse

  #144 opened 7 years ago by ShawnPierpont
  1

• Control pump based on temperature readings

  #115 opened 7 years ago by smit-happens
  2

• Orion/Teensy Control cooling fans via CAN

  #105 opened 7 years ago by atokosch
  1

• Make launch an option for driving stage

  #107 opened 7 years ago by smit-happens
  1

• Implement toggle function for Lights

  #104 opened 7 years ago by smit-happens
  1

• brake pedal polling

  #140 opened 7 years ago by smit-happens
  0

• Have brake pedal trigger brake light

  #117 opened 7 years ago by smit-happens
  0

• Check BMS error line

  #112 opened 7 years ago by smit-happens
  0

• Check IMD error line

  #113 opened 7 years ago by smit-happens
  0

• GLV Battery Voltage Too Low Notification

  #145 opened 7 years ago by atokosch
  4

• Logger interface

  #151 opened 7 years ago by smit-happens
  0

• Implement Standby button

  #118 opened 7 years ago by smit-happens
  0

• Close log files off in shutdown

  #127 opened 7 years ago by YoungMaker
  1

• Not going into Energized

  #158 opened 7 years ago by smit-happens
  1

• Release motor on brake pedal press

  #128 opened 7 years ago by YoungMaker
  0

• Notify Driver HV Batteries Below 20% - (driver doesn't look at GLCD)

  #141 opened 7 years ago by atokosch
  4

• Logger msgPump crashes, likely accessing incorrect memory. Part of #151

  #152 opened 7 years ago by YoungMaker
  1

• Write Unit Tests to cover Basic/Critical functions of the car

  #149 opened 7 years ago by PatHock
  0

• Hold brake to start car

  #122 opened 7 years ago by smit-happens
  1

• Send Gas pedal percentage to unitek

  #129 opened 7 years ago by smit-happens
  0

• implement CanController structure

  #136 opened 7 years ago by smit-happens
  0

• RTD Button Press

  #139 opened 7 years ago by atokosch
  1

• Drive Enable signal

  #131 opened 7 years ago by smit-happens
  1

• Play RTD siren

  #126 opened 7 years ago by smit-happens
  0

• Turn on pump

  #111 opened 7 years ago by smit-happens
  0

• Precharge start signal

  #123 opened 7 years ago by smit-happens
  2

• Handle Precharge done signal

  #125 opened 7 years ago by smit-happens
  1

• Multiple task flags going off for buttons

  #135 opened 7 years ago by smit-happens
  3

• Check Error/Warning register of Unitek

  #114 opened 7 years ago by smit-happens
  0

• Swap encoder pins in Port.h

  #134 opened 7 years ago by smit-happens
  0

• Set SCADA OK low signal before shutdown

  #124 opened 7 years ago by YoungMaker
  0

• Refactor Stages

  #108 opened 7 years ago by smit-happens
  1

• SCADA_OK signal high on Bootup

  #110 opened 7 years ago by smit-happens
  0

• Combine test stage into bootup

  #109 opened 7 years ago by smit-happens
  0

• Encoder implementation

  #120 opened 7 years ago by smit-happens
  0

• Monitor GLV battery percentage

  #121 opened 7 years ago by smit-happens
  1