/spread

Spread - Convenient full-system test (task) distribution

Primary LanguageGoGNU General Public License v3.0GPL-3.0

Spread

Convenient full-system test (task) distribution

Why?
The cascading matrix
Install Hello world
Environments
Variants
Blacklisting and whitelisting
Preparing and restoring
Functions Rebooting
Timeouts
Fast iterations with reuse
Debugging
Repeating tasks Passwords and usernames
Including, excluding, and renaming files
Selecting which tasks to run
Disabling unless manually selected
Fetching artifacts
LXD backend
QEMU backend
Google backend
Linode backend
AdHoc backend
More on parallelism
Repacking and delta uploads

Why?

Because our integration test machinery was unreasonably frustrating. It was slow, very unstable, hard to make sense of the output, impossible to debug, hard to write tests for, hard to run on multiple environments, and parallelism was not a thing.

Spread came out as a plesant way to fix that. A few simple and concrete concepts that are fun to play with and fix the exact piece missing in the puzzle. It's not Jenkins, it's not Travis, it's not a library, not a language, and it's not even specific to testing. It's a simple way to express what to run and where, what to do before and after it runs, and how to duplicate jobs with minor variations without copy & paste.

The cascading matrix

Each individual job in Spread has a:

  • Project - There's a single one of those. This is your source code repository or whatever the top-level thing is that you want to run tasks for.

  • Backend - A few lines expressing how to obtain machines for tasks to run on. Add as many of these as you want, as long as it's one of the supported backend types (bonus points for contributing a new backend type - it's rather easy).

  • System - This is the name and version of the operating system that the task will run on. Each backend specifies a set of systems, and optionally the number of machines per system (more parallelism for the impatient).

  • Suite - A couple more lines and you have a group of tasks which can share some settings. Defining this and all the above is done in spread.yaml or .spread.yaml in your project base directory.

  • Task - What to run, effectively. All tasks for a suite live under the same directory. One directory per suite, one directory per task, and task.yaml inside the latter.

  • Variants - All of the above is nice, but this is the reason of much rejoice. Variants are a mechanism that replicates tasks with minor variations with no copy & paste and no trouble. See below for details.

Again, each job in spread has a single one of each of these. If you have two systems and one task, there will be two jobs running in parallel on each of the two systems. If you have two systems and three tasks, you have six jobs, three in parallel with three. See where this is going? You can easily blacklist specific cases too, but this is the basic idea.

Any time you want to see how your matrix looks like and all the jobs that would run, use the -list option. It will show one entry per line in the format:

backend:system:suite/task:variant

Install

Please install spread using Go install method:

go install github.com/snapcore/spread/cmd/spread@latest

Hello world

Two tiny files and you are in business:

$PROJECT/spread.yaml

project: hello-world

backends:
    lxd:
        systems: [ubuntu-16.04]

suites:
    examples/:
        summary: Simple examples

path: /remote/path

$PROJECT/examples/hello/task.yaml

summary: Greet the planet
execute: |
    echo "Hello world!"
    exit 1

This example uses the LXD backend on the local sytem and thus requires Ubuntu 16.04 or later. If you want to distribute the tasks over to a remote system, try the Linode backend with:

$PROJECT/spread.yaml

backends:
    linode:
        key: $(HOST:echo $LINODE_API_KEY)
        systems: [ubuntu-16.04]

Then run the example with $ spread from anywhere inside your project tree for instant gratification. The echo will happen on the remote machine and system specified, and you'll see the output locally since the task failed (-vv to see the output nevertheless).

The default output for the example should look similar to this:

2016/06/06 09:59:34 Allocating server lxd:ubuntu-16.04...
2016/06/06 09:59:55 Waiting for LXD container spread-1-ubuntu-16-04 to have an address...
2016/06/06 09:59:59 Allocated lxd:ubuntu-16.04 (spread-1-ubuntu-16-04).
2016/06/06 09:59:59 Connecting to lxd:ubuntu-16.04 (spread-1-ubuntu-16-04)...
2016/06/06 10:00:04 Connected to lxd:ubuntu-16.04 (spread-1-ubuntu-16-04).
2016/06/06 10:00:04 Sending data to lxd:ubuntu-16.04 (spread-1-ubuntu-16-04)...
2016/06/06 10:00:05 Error executing lxd:ubuntu-16.04:examples/hello:
-----
+ echo Hello world!
Hello world!
+ exit 1
-----
2016/06/06 10:00:05 Discarding lxd:ubuntu-16.04 (spread-1-ubuntu-16-04)...
2016/06/06 10:00:06 Successful tasks: 0
2016/06/06 10:00:06 Aborted tasks: 0
2016/06/06 10:00:06 Failed tasks: 1
    - lxd:ubuntu-16.04:examples/hello

Environments

Pretty much everything in Spread can be customized with environment variables.

$PROJECT/examples/hello/task.yaml

summary: Greet the planet
environment:
    SUBJECT: world 
    GREETING: Hello $SUBJECT!
execute: |
    echo "$GREETING"
    exit 1

The values defined for those variables are evaluated at the remote system and may contain references to other variables as well as commands using the typical $(...) shell syntax. As a special case, executing such commands locally at the host running Spread is also possible via the syntax $(HOST:...). This is handy to feed local details such as API keys out of files or local environment variables as was done on the Linode example.

Common variables and defaults are possible by defining them in the suite or earlier:

$PROJECT/spread.yaml

(...)

suites:
    examples/:
        summary: Simple examples
        environment:
            SUBJECT: sanity

The cascading happens in the following order:

  • Project => Backend => System => Suite => Task

All of these can have an equivalent environment field and their variables will be ordered accordingly on executed scripts.

Variants

The cascading logic explained is nice, but a great deal of the convenience offered by Spread comes from variants.

If you understood how the environment cascading takes place, watch this:

$PROJECT/spread.yaml

(...)

suites:
    examples/:
        summary: Simple examples
        environment:
            SUBJECT/foo: sanity
            SUBJECT/bar: lunacy

Now every task under this suite will run twice1 - once for each variant key defined.

Then, let's redefine the examples/hello task like this:

$PROJECT/examples/hello/task.yaml

summary: Greet the planet
environment:
    GREETING: Hello
    GREETING/bar: Goodbye
    SUBJECT/baz: world
execute: |
    echo "$GREETING $SUBJECT!"
    exit 1

This task under that suite will spawn three independent jobs, producing the following outputs:

  • Variant "foo": Hello sanity!
  • Variant "bar": Goodbye lunacy!
  • Variant "baz": Hello world!

Some key takeaways here:

  • Each variant key produces a single job per task.
  • It's okay to declare the same variable with and without a variant suffix. The bare one becomes the default.
  • The variant key suffix may be comma-separated for multiple definitions at once (SUBJECT/foo,bar).

1 Actually, times two. It's an N-dimensional matrix.

Blacklisting and whitelisting

The described cascading and multiplication semantics of that matrix offers plenty of comfort for reproducing the same tasks with minor or major variations, but the real world is full of edge cases. Often things will be mostly smooth except for that one case that doesn't quite make sense on such and such situations.

For fine tuning, Spread has a convenient mechanism for blacklisting or whitelisting particular cases across most axis of the matrix.

For example, let's avoid lunacy altogether by blacklisting the bar variant out of the particular task:

variants:
    - -bar

Alternatively, let's reach the same effect by explicitly stating which variants to use for the task (no - or + prefix):

variants:
    - foo
    - baz

Finally, we can also append another key to current set of variants without replacing the existing ones:

variants:
    - +buz

We've been talking about tasks, but this same field works at the project, backend, suite, and task levels. This is also not just about variants either. The following fields may be defined with equivalent add/remove or replace semantics:

  • backends: [...] (suite and task)
  • systems: [...] (suite and task)
  • variants: [...] (project, backend, suite, and task)

So what if you don't want to run a specific task or whole suite on ubuntu-14.04? Just add this to the task or suite body:

systems: [-ubuntu-14.04]

Cascading also takes place for these settings - each level can add/remove/replace what the previous level defined, again with the ordering:

  • Project => Backend => System => Suite => Task

Preparing and restoring

A similar group of tasks will often depend on a similar setup of the system. Instead of copying & pasting logic, suites can define scripts for tasks under them to execute before running, and also scripts that will restore the system to its original state so that follow up logic will find a (hopefuly? :) unmodified base:

$PROJECT/spread.yaml

(...)

suites:
    examples/:
        summary: Simple examples
        prepare: |
            echo Preparing...
        restore: |
            echo Restoring...

The prepare script is called once before any of the tasks inside the suite are run, and the restore script is called once after all of the tasks inside the suite finish running.

Note that the restore script is called even if the prepare or execute scripts failed at any point while running, and it's supposed to do the right job of cleaning up the system even then for follow up logic to find a pristine state. If the restore script itself fails to execute, the whole system is considered broken and follow up jobs will be aborted. If the restore script does a bad job silently, you may instead lose your sleep over curious issues.

By now you may already be getting used to this, but the prepare and restore fields are not in fact exclusive of suites. They are available at the project, backend, suite, and task levels. In addition to those, the project, backend, and suite levels may also hold prepare-each and restore-each fields, which are run before and after each task executes.

Assuming two tasks available under one suite, one task under another suite, and no failures, this is the ordering of execution:

project prepare
    backend1 prepare
        suite1 prepare
            project prepare-each
                backend1 prepare-each
                    suite1 prepare-each
                        task1 prepare; task1 execute; task1 restore
                    suite1 restore-each
                backend1 restore-each
            project restore-each
            project prepare-each
                backend1 prepare-each
                    suite1 prepare-each
                        task2 prepare; task2 execute; task2 restore
                    suite restore-each
                backend1 restore-each
            project restore-each
        suite1 restore
        suite2 prepare
            project prepare-each
                backend1 prepare-each
                    suite2 prepare-each
                        task3 prepare; task3 execute; task3 restore
                    suite2 restore-each
                backend2 restore-each
            project restore-each
        suite2 restore
    backend1 restore
project restore

Typically only a few of those script slots will be used.

In addition to preparing and restoring scripts, debug and debug-each scripts may also be defined in the same places. These are only run when other scripts fail, and their purpose is to display further information which might be helpful when trying to understand what went wrong.

Functions

A few helper functions are available for scripts to use:

  • REBOOT - Reboot the system. See below for details.
  • MATCH - Run grep -q -e on stdin. Without match, print error including content.
  • NOMATCH - Assert no match on stdin. If match found, print error including content.
  • ERROR - Fail script with provided error message only instead of script trace.
  • FATAL - Similar to ERROR, but prevents retries. Specific to adhoc backend.
  • ADDRESS - Set allocated system address. Specific to adhoc backend.

Rebooting

Scripts can reboot the system at any point by simply running the REBOOT function at the exact point the reboot should happen. The system will then reboot and the same script will be re-executed with the $SPREAD_REBOOT environment variable set to the number of times the script has rebooted the system.

$PROJECT/examples/hello/task.yaml

execute: |
    if [ $SPREAD_REBOOT = 0 ]; then
        echo "Before reboot"
        REBOOT
    fi
    echo "After reboot"

Alternatively the REBOOT function may also be called with a single parameter which will be used as the value of $SPREAD_REBOOT after the system reboots, instead of the count.

Timeouts

Every 5 minutes a warning will be issued including the operation output since the last warning. If the operation does not finish within 15 minutes, it is killed and considered an error per the usual rules of whatever is being run. For example, a killed task is considered failed, but a killed restore script will render the whole system broken (see Preparing and restoring).

These timings may be tweaked at the project, backend, suite, and task level, by defining the warn-timeout and kill-timeout fields with a value such as 30s, 1m30s, 10m, or 1.5h. A value of -1 means disable the timeout altogether.

Fast iterations with reuse

For fast iterations during development or debugging, it's best to keep the servers around so they're not allocated and discarded on every run. To do that just provide the -reuse flag. On any successful allocation the server details are immediately written down for tracking. Then, just provide -reuse again on follow up runs and servers already alive will be used whenever possible, and new ones will be allocated and also tracked down if necessary to perform follow up operations.

Without the -resend flag, the project files previously sent are also left alone and reused on the next run. That said, the spread.yaml and task.yaml content considered is actually the one in the local machine, so any updates to those will always be taken in account on re-runs.

Once you're done with the servers, throw them away with -discard. Reused systems will remain running for as long as desired by default, which may run the pool out of machines. With Linode you may define the halt-timeout option to allow Spread itself to shutdown those systems and use them, without destroying the data.

The obvious caveat when reusing machines like this is that failing restore scripts or bogus ones may leave the server in a bad state which affects the next run improperly. In such cases the restore scripts should be fixed to be correct and more resilient.

Debugging

Debugging such remote tasking systems is generally quite boring, and Spread offers a good hand to make the problem less painful. Just add -debug to whatever set of options is in use and it will stop and open a shell at the exact point you get a failure, with the exact same environment as the script had. Exit the shell and the process continues, until the next failure, no matter which backend or system it was in.

Similarly, -shell, -shell-before, and -shell-after allow running an interactive shell instead of, before, and after the original task script, respectively, for every job that was selected to run. You'll most probably want to filter down what is being run when using that mode, to avoid having a troubling sequence of shells opened.

If you'd prefer to debug by logging in from an independent ssh session, the -abend option will abruptly stop the execution on failures, without running any of the restore scripts. You'll probably want to pair that with the -reuse option so the server is not discarded, and after you're done with the debugging in this style it may be necessary to do a run with the -restore flag, to clean up the state left behind by the task.

Besides manual debugging through those flags, it's often handy to have more details displayed once something does break. Next to (preparing and restoring)[#preparing] scripts, Spread supports specifying debug scripts that are run in trace mode and have their output reported when a failure happens:

$PROJECT/examples/hello/task.yaml

execute: |
    echo "Something went wrong."
    exit 1
debug: |
    dmesg | tail

In a similar way to prepare and restore scripts, these can also be defined as a debug-each script at the project, backend, and suite levels, so they are aggregated and repeated for every task under them.

Ordering tasks

The order of tasks on every run is random by default, so that it becomes visible when the correctness of some tasks depends on unspecified side effects of prior tasks.

When breakages related to ordering occur, Spread can attempt to reproduce the ordering used via the -seed parameter. On every run, the required seed to reproduce the order utilized will be logged in the output. Note that when several workers are being used, they will steal pending work from a common queue based on timing, which means the order may not be exactly the same.

In some cases, it may also be useful to explicitly prioritize some tasks. For example, if there are two workers and one long task, it's best if that known long task starts first, so that the workers can share more of the load. If the long task comes last the two workers will share all the smaller tasks, then one worker will pick the long task, and the other worker will stop since there's nothing else to do. The outcome is a longer total run time.

To define the priority of a task, suite, system, or backend, simply specify the priority field in the desired context:

priority: 100

The larger the priority, the earlier it will be scheduled. The default priority is zero, and negative priorities are supported too.

Repeating tasks

Reproducing an error may be a very boring experience, and Spread has a way to simplify that process by reexecuting the tasks as many times as desired until the task fails.

To do that there is an option -repeat which receives an integer indicating the number of reexecutions to do, being 0 the default value.

Passwords and usernames

To keep things simple and convenient, Spread prepares systems to connect over SSH as the root user using a single password for all systems. Unless explicitly defined via the -pass command line option, the password will be random and different on each run.

Some of the supported backends may be unable to provide an image with the correct password in place, or with the correct SSH configuration for root to connect. In those cases, the system "username" and "password" fields may be used to tell Spread how to perform the SSH connection:

$PROJECT/spread.yaml

backends:
    qemu:
        systems:
            - debian-sid:
                password: mypassword
            - ubuntu-16.04:
                username: ubuntu
                password: ubuntu

If the password field is defined without a username, it specifies the password for root to connect over SSH. If both username and password are provided, the credentials will be used to connect to the system, and password-less sudo must be available for the provided user.

In all cases the end result is the same: a system that executes scripts as root.

Including, excluding, and renaming files

The following fields define what is pushed to the remote servers after each server is allocated and where that content is placed:

$PROJECT/spread.yaml

(...)

path: /remote/path

include:
    - src/*
exclude:
    - src/*.o

rename:
    - s,path/one,path/two,

The path option must be provided to define the base directory where the content will live under, while include defaults to a single entry with * which causes everything inside the project directory to be sent over.

The remote tree will usually look the same as the local one, but that may be changed using the rename field. It takes a list of regular expressions that act on the full relative name of each entry, and also on the target of symbolic links. To avoid touching the target of symbolic links append the S modifier as a suffix of the expression.

Note that Spread will still expect tasks to live in the same directories as they do locally, so these directories cannot be moved.

Selecting which tasks to run

Often times you'll want to iterate over a single task or a few of these, or a given suite, or perhaps select a specific backend to run on instead of doing them all.

For that you can pass additional arguments indicating what to run:

$ spread my-suite/task-one my-suite/task-two

These arguments are matched against the Spread job name which uniquely identifies it, looking like this:

1. lxd:ubuntu-16.04:mysuite/task-one:variant-a
2. lxd:ubuntu-16.04:mysuite/task-two:variant-b

The provided parameter must match one of the name components exactly, optionally making use of the ... wildcard for that. As an exception, the task name may be matched partially as long as the slash is present as a prefix or suffix. Matching multiple components at once is also possible separating them with a colon; they don't have to be consecutive as long as the ordering is correct.

For example, assuming the two jobs above, these parameters would all match at least one of them:

  • lxd
  • lxd:mysuite/
  • ubuntu-16.04
  • ubuntu-...
  • mysuite/
  • /task-one
  • /task...
  • mysu...one
  • lxd:ubuntu-16.04:variant-a

The -list option is useful to see what jobs would be selected by a given filter without actually running them.

Disabling unless manually selected

It may be useful to have a task written down as part of the suite without it being run all the time together with the usual tasks. For that, just add a manual: true field, and it will only be run when explicitly selected. This is equivalent to disabing the task, except it may still be run when manually selected.

For example:

$PROJECT/examples/manually-run/task.yaml

summary: This task only runs manually.

manual: true

...

The logic for explicit selection is the following: if the provided arguments match any non-manual tasks at all, the manual tasks are not run, even if they match the arguments.

Besides tasks, the same logic works for backends, systems, and suites. Just add the manual field to their definition and they will only run when explicitly selected, following the same logic described above: if the provided arguments match any non-manual suite, matching manual suites won't run, and so on.

Note that it's fine to have manual and non-manual tasks inside a manual suite, and so forth. Play with -list to get a clear idea of what is selected to run.

Fetching residual artifacts

Content generated by tasks may easily be retrieved after the task completes by registering the desired content under the artifacts field:

$PROJECT/examples/hello/task.yaml

summary: Generate some useful content.

artifacts:
    - some/file
    - some/dir/

...

The provided directory or file paths are relative to the task directory, and they are only considered when Spread is run with the -artifacts flag pointing to the target directory where content will be downloaded into.

For example, consider the following command:

$ spread -artifacts=./artifacts lxd:ubuntu-16.04:mysuite/task-one:variant-a

Assuming the given task has residual content registered, the directory ./artifacts/lxd:ubuntu-16.04:mysuite/task-one:variant-a would be created to hold it after the job is executed.

Residual content is fetched whether the job finishes successfully or not, and even if some of the provided paths are missing.

LXD backend

The LXD backend depends on the LXD container hypervisor available on Ubuntu 16.04 or later, and allows you to run tasks using the local system alone.

Setup LXD there with:

sudo apt update
sudo apt install lxd
sudo lxd init

Then, make sure your local user has access to the lxc client tool. If you can run lxc list without errors, you're good to go. If not, you'll probably have to logout and login again, or manually change your group with:

$ newgrp lxd

Then, setting up the backend in your project file is as trivial as:

backends:
    lxd:
        systems:
            - ubuntu-16.04

System names are mapped into LXD images the following way:

  • ubuntu-16.04 => ubuntu:16.04
  • debian-sid => images:debian/sid/amd64
  • fedora-8 => images:fedora/8/amd64
  • etc

Alternatively they may also be provided explicitly as:

backends:
    lxd:
        systems:
            - ubuntu-16.04:
                image: ubuntu:16.04.1

That's it. Have fun with your self-contained multi-system task runner.

QEMU backend

The QEMU backend depends on the QEMU emulator available from various sources and allows you to run tasks using the local system alone even if those tasks depend on low-level features not avaliable under LXD.

Setting up the QEMU backend looks similar to:

$PROJECT/spread.yaml

backends:
    qemu:
        systems:
            - ubuntu-16.04:
                username: ubuntu
                password: ubuntu

For this example to work, a QEMU image must be made available under ~/.spread/qemu/ubuntu-16.04.img, and when run this image must open an SSH daemon on port 22 using the provided credentials.

During the initial setup, spread will enable root access over SSH, and will set its password to the current global password in use for the running session as usual for every other backend (random by default, see the -pass command line option).

The QEMU backend is run with the -nographic option by default. This may be changed with export SPREAD_QEMU_GUI=1.

Note that at the moment QEMU is run via the kvm script, which enables the KVM performance optimizations for the local architecture. This will not work for other architectures, though. This problem may be easily addressed in the future when use cases show up.

As a hint if you are using Ubuntu, here is an easy way to get a suitable QEMU image:

sudo apt install qemu-kvm autopkgtest
adt-buildvm-ubuntu-cloud

When done move the downloaded image into the location described above.

Google backend

The Google backend is easy to setup and use, and allows distributing your tasks to remote infrastructure in Google Compute Engine (GCE).

$PROJECT/spread.yaml

(...)

backends:
    google:
        key: $(HOST:echo $GOOGLE_JSON_FILENAME)
	location: yourproject/southamerica-east1-a
        systems:
            - ubuntu-16.04

	    # Extended syntax:
	    - another-system:
	        image: some-other-image
		workers: 3

With these settings the Google backend in Spread will pick credentials from the JSON file pointed to in $GOOGLE_JSON_FILENAME environment variable (we don't want that content inside spread.yaml itself). If no key is explicitly provided, Spread will attempt to use the "application default" credentials as traditional in the Google platform. You can set those up by using either a service account:

$ gcloud auth application-default activate-service-account --key-file=$GOOGLE_JSON_FILENAME

or your own credentials:

$ gcloud auth application-default login

Service accounts are best as they can be further constrained and not be associated with your overall authenticated access. Do not ship your own credentials to remote systems.

Images are located by first attempting to match the provided value exactly against the image name, and then some processing is done to verify if an image with the individual tokens in its description exists. Images are first searched for in the project itself, and then if the prefix is a recognized name for which a public image project exists (e.g. ubuntu-* is searched for in the ubuntu-os-cloud project too). An explicit image project may also be requested by prefixing the image name with a project name, as in "ubuntu-os-cloud/ubuntu-16.04-64".

When these machines terminate running, they will be removed. If anything happens that prevents the immediate removal, they will remain in the account and need to be removed by hand.

For long term use, a dedicated project in the Google Cloud Platform is recommended to prevent automated manipulation of important machines.

Linode backend

The Linode backend is very simple to setup and use as well, and allows distributing your tasks over into remote infrastructure runing in Linode's data centers.

$PROJECT/spread.yaml

(...)

backends:
    linode:
        key: $(HOST:echo $LINODE_API_KEY)
        systems:
            - ubuntu-16.04

With these settings the Linode backend in Spread will pick the API key from the local $LINODE_API_KEY environment variable (we don't want that in spread.yaml), and look for a powered-off server available on that user account that. When it finds one, it creates a brand new configuration and disk set to run the tasks. That means you can even reuse existing servers to run the tasks, if you wish. When discarding the server, assuming no -reuse or -debug, it will power off the server and remove the created configuration and disks, leaving it ready for the next run.

The root disk is built out of a Linode-supported distribution or a custom image available in the user account. The system name is mapped into an image or distribution label the following way:

  • ubuntu-16.04 => Ubuntu 16.04 LTS
  • debian-8 => Debian 8
  • arch-2015-08 => Arch Linux 2015.08
  • etc

Images have user-defined labels, so they're also searched for using the Spread system name itself.

Alternatively, the extended system syntax may be used to define these details:

(...)

backends:
    linode:
        key: (...)
	systems:
	    - ubuntu-16.04:
	        image: Ubuntu 16.04
	        kernel: GRUB 2

The image value is matched case-insensitively as a prefix of one of the Linode-supported distributions or a custom image available in the user account. The kernel value is similarly matched against the available kernels.

Both fields are optional. Image defaults to the behavior based on system name described above, and the kernel defaults to the latest recommended Linode kernel.

Reused systems will remain running for as long as desired by default, which may run the pool out of machines. Define the halt-timeout option to allow Spread itself to shutdown those systems and use them, without destroying the data:

$PROJECT/spread.yaml

backends:
    linode:
        key: (...)
	halt-timeout: 6h
	systems:
	    - ubuntu-16.04

The Linode backend can also allocate systems dynamically. For that, just define these two fields specifying which plan you'd like to use for the new machines, and which datacenter to allocate them on:

backends:
    linode:
        key: (...)
	plan: 4GB
	location: newark

When these machines terminate running, they will be removed. If anything happens that prevents the immediate removal, they will remain in the account and then be reused by follow up runs and removed when done, effectively garbage collecting what's left behind. System reuse works as explained above too.

Note that in Linode you can create additional users inside your own account that have limited access to a selection of servers only, and with limited permissions on them. You should use this even if your account is entirely dedicated to Spread, because it allows you to constrain what the key in use is allowed to do on your account. Note that you'll need to login with the sub-user to obtain the proper key.

Some links to make your life easier:

AdHoc backend

The AdHoc backend allows scripting the procedure for allocating and deallocating systems directly in the body of the backend:

$PROJECT/spread.yaml

backends:
    adhoc:
    	allocate: |
            echo "Allocating $SPREAD_SYSTEM..."
            ADDRESS disposable.machine.address:22
        discard:
            echo "Discarding $SPREAD_SYSTEM..."
        systems:
            - ubuntu-16.04

The AdHoc scripts have the following custom commands available:

  • ADDRESS addr[:port] - Inform SSH address of machine allocated.
  • ERROR message - Exit with error message. Operation may be retried.
  • FATAL message - Exit with fatal message. Operation won't be retried.

A failing script (non-zero exit) is equivalent to calling ERROR, but rather than displaying a nice message, the whole script trace and output will be shown.

The following environment variables are available for the scripts to do their job:

  • SPREAD_BACKEND - Name of current backend.
  • SPREAD_SYSTEM - Name of the system being allocated.
  • SPREAD_PASSWORD - Password root will use to connect to the allocated system. Not available if the system has a custom username or password defined.
  • SPREAD_SYSTEM_USERNAME - Username Spread will connect as for initial system setup.
  • SPREAD_SYSTEM_PASSWORD - Password Spread will connect as for initial system setup.
  • SPREAD_SYSTEM_ADDRESS - Address of the allocated system. Only available for discard.

The system allocated by the allocate script must return a system that Spread can connect to over SSH. The system must be either setup to be accessible as root using the session password (random or specified with -pass), or be accessible with the username and password details specified under the system name (see passwords and usernames).

Note that the system returned by adhoc, although it can point to anything accessible over SSH, is supposed to be a disposable system oriented towards running the specified tasks only. It's atypical and dangerous for Spread to be run against important systems, as it will fiddle with their configuration.

More on parallelism

The systems entry under each backend contains a list of systems that will be allocated on that backend for running tasks concurrently.

Consider these settings:

$PROJECT/spread.yaml

(...)

backends:
    linode:
        systems:
            - ubuntu-14.04
            - ubuntu-16.04:
                workers: 2

This will cause three different machines to be allocated for running tasks concurrently: one running Ubuntu 14.04 and two 16.04.

Systems share a single job pool generated out of the variable matrix, and will run through it observing the constraints specified. For example, if there is a backend with one ubuntu-16.04 and one ubuntu-16.10 system, and there's one suite with 100 tasks, there will be 200 jobs and each system will run exactly 100 tasks because the 200 jobs were generated precisely so that both systems could be exercised. On the other hand, if that same backend has instead two ubuntu-16.04 systems, there will be only 100 jobs matching the 100 tasks, and each system will run approximately half of them each, assuming similar task execution duration.

Spread can also take multiple backends of the same type. In that case the backend name will not match the backend type and thus the latter must be provided explicitly:

backends:
    linode-a:
        type: linode
        (...)
    linode-b:
        type: linode
        (...)

This is generally not necessary, but may be useful when fine-tuning control over the use of sets of remote machines.

Repacking and delta uploads

When working over slow networks even small uploads tend to take a bit too long. Spread offers a general "repacking" mechanism that may be used to transform the data being delivered in arbitrary ways, even into a delta of content that the remote servers can obtain by themselves, for example.

The repack script is run with file descriptors 3 and 4 used as pipes for the specified project content into and out of the script, respectively, in tar format. In other words, the original specified project content may be read from file descriptor 3, and the new project content must be writen into file descriptor 4.

To illustrate, the following repack script will preserve content unchanged:

$PROJECT/spread.yaml

repack: |
    cat <&3 >&4

As a more complex example, the following setup explores that feature to ship a delta from a GitHub repository, computed on top of a tag or commit reference that is knowingly part of the history for all clients:

environment:
    DELTA_REF: v1.23

rename:
    - s,^,$DELTA_REF,S

exclude:
    - .git

repack: |
    trap "rm -f delta-ref.tar current.delta" EXIT
    git archive -o delta-ref.tar --format=tar --prefix=$DELTA_PREFIX $DELTA_REF
    xdelta3 -s delta-ref.tar <&3 > current.delta
    tar c current.delta >&4

prepare: |
    apt-get install xdelta3
    curl -s -o - https://codeload.github.com/myrepo/myproject/tar.gz/$DELTA_REF | gunzip > delta-ref.tar
    xdelta3 -d -s delta-ref.tar current.delta | tar x --strip-components=1
    rm -f delta-ref.tar current.delta

The rename and exclude settings used above ensure that the tarball that goes into repack looks like the one offered by GitHub.