libnss_tacplus v1.0.1 June 22, 2016 This NSS module has one and only one purpose. It allows getpwname lookups for TACACS+ users that login without any local account on the system (mapped to local tacacs0..15), when authenticated with pam_tacplus. libnss_tacplus is not useful by itself. libnss_tacplus uses libtacplus-map to lookup mappings, and libtac to communicate with TACACS+ servers. libnss_tacplus provides only the getpwnam_r entry point, and uses the libtac authenticate and accounting functions. Normal use is to have tacplus as the last lookup method for "passwd" in /etc/nsswitch.conf, although it will work in any position: passwd: compat tacplus The above edit is made for debian packages via postinst at installation. If the username is found, and is also found in the local password file (via fgetpwent()), the local user passwd structure is returned (that is, the plugin is basicly a NOP). Otherwise, the plugin asks the TACACS+ server if the user is known, and then asks for attributes, so it can determine the user's privilege level. If the username is not found, a mapped lookup is performed using the libtacplus_map.so exported functions. The lookup is done by the one or two digit privilege level (0 by default) to "tacacs", and looking that name up in the local password file; that is, privilege level 15 looks for local user "tacacs15". If found, the password structure is filled in with the information for that user, *except* that pw_name is filled in with the original (login) name. This code is based in the pam_tacplus plugin, written by Pawel Krawczyk <pawel.krawczyk@hush.com> and Jeroen Nijhof <jeroen@jeroennijhof.nl>, as well as others. It is based on version pam_tacplus version 1.3.9. It uses the libtac as found in pam_tacplus. A few minor changes have been made, and libtac is built as a static archive library. This library requires that the libpam_tacplus headers and shared libraries be built and installed (my modified version, not the stock version) to build, and to function. All are performed using TACACS+ protocol [1], designed by Cisco Systems. This is remote AAA protocol, supported by most Cisco hardware. ~~~~~~~~~~~~~~~~~~~ Recognized options in the configuration file are the same as the command line arguments for libpam_tacplus, but not all pam_tacplus options are supported. Option Description --------------- ---------------------------------- debug output debugging information via syslog(3); note, that the debugging is heavy, including passwords! secret=STRING can be specified more than once; secret key used to encrypt/decrypt packets sent/received from the server server=HOSTNAME can be specified more than once; server=IP_ADDR adds a TACACS+ server to the servers list default is 5 seconds login=STRING TACACS+ authentication service, this can be "pap", "chap" or "login" at the moment. Default is pap. service TACACS+ service for authorization and accounting protocol TACACS+ protocol for authorization and accounting min_uid min_uid is the minimum uid to lookup via tacacs. Setting this to 0 means uid 0 (root) is never looked up, good for robustness and performance. Should not be greater than the local tacacs{0..15} uids exclude_users This is a comma separated list of usernames that are never looked up via tacacs. Should include system users such as root. The service and protocol items are widely described in TACACS+ draft [1]. They are required by the server, but it will work if they don't match the real service authorized :) See tacplus_nss.conf for an example configuration file. See the libpam_tacplus README for more information on the tacacs protocol, server_lists, etc. On first call, we parse the configuration file (we only try once, unless it can't be opened, in which case we'll keep trying on every call). We then try to connect to a tacacs server. After connecting we ask if the user is known (we send an authorization request to the server). This function sends an encrypted packet to the TACACS+ server. The packet contains username to verify. TACACS+ server replied with either positive or negative response. If the reponse is negative, the whole thing is over ;) If the server responds that the user is valid (no authentication exchange is done), we parse the returned attributes (if any) looking for the privilege level (any string starting with "priv", case independent), and then parse out the privilege level, and construct the "tacacs##" username. At this time, we make a new connection to the tacacs server on every getpwnam_r(). Ideally, that would not be done, but it appears that the linux tacplus server, at least, closes the connection at it's end after the exchange, so subsequent requests get SIGPIPE. Limitations: ~~~~~~~~~~~~ This libnss_tacplus plugin has only been compiled and tested on debian wheezy and jessie at this writing. The FreeBSD NSS interface is somewhat different, and will require porting. This plugin has only been tested with the unmodified linux tacacs+ server so far (using the debian wheezy package) References: ~~~~~~~~~~~ TACACS+ 1. ftp://ftpeng.cisco.com/pub/tacplus/tac_plus.rfc.1.76.txt 2. ftp://ftpeng.cisco.com/pub/tacplus/tac_plus.3.0.12.alpha.tar.Z NSS plugin (glibc) 3. http://www.gnu.org/software/libc/manual/html_node/Name-Service-Switch.html Author: ~~~~~~~ Dave Olson <olson@cumulusnetworks.com>
snaproute-mino/libnss-tacplus
NSS plugin to lookup tacacs client username, and match mapped user after login
ShellGPL-2.0